The Forensics Detectors FD-60-CO fixed gas detector detects carbon monoxide (CO) using an electrochemical sensor and is wall-mounted. For continuous monitoring, it features an LED indicator and buzzer, while its two relay outputs can control fans or ventilation units. It is suitable for commercial premises such as laboratories, garages, boiler rooms and process areas.
The detector samples by natural diffusion, without a pump, and is factory-calibrated. Its housing is made of cast aluminium alloy and has an IP65 rating. The package includes a 24 V power supply, a remote control with battery, an HEX key, wiring, a user manual and a calibration certificate.
- Gas type: Carbon monoxide (CO)
- Measurement range: 0–1000 ppm
- Resolution: 1 ppm
- Sensor type: Electrochemical
- Sensor life: 2–3 years
- Sampling method: Natural diffusion
- Response time: Less than 60 seconds
- Relay outputs: 2 contacts, up to 50 W per relay
- Analogue output: 4–20 mA
- Digital output: RS485 MODBUS
- Measurement error: ≤ ±5% F.S.
- Alarm: LED indicator and buzzer
- Buzzer volume: ≥ 85 dB at 1 m
- Power supply: DC 24 V ±15%, 100–240 V AC, 50/60 Hz
- Maximum power consumption: 20 W
- Operating and storage temperature: −18 to 50 °C
- Operating and storage humidity: Below 95% RH
- Operating pressure: Nominal 1.0 bar, range 0.8–1.2 bar
- Protection rating: IP65
- Explosion-proof certification: ATEX Ex d ⅡC T6 Gb
- Calibration: Factory calibration, with certificate
- Recommended calibration interval: 12 months
- Dimensions: 20 × 18 × 9 cm
- Weight: 1.4 kg
- Housing material: Cast aluminium alloy
- Threads: G1/2 and M20 × 1.5 mm
- Package contents: Gas detector, user manual, remote control with battery, HEX key, 24 V power supply for a 110 V outlet, wiring and calibration certificate
- Type of Gas
- CO
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.