For continuous CO2 or CO monitoring, the Forensics Detectors FD-60-EXTEND-CO gas meter features a wall-mounted display and a remote sensor head with a 10 ft extension cable. The LED alarm and buzzer provide alerts in the event of an alarm, while two relay outputs can control fans or ventilation units. The sensor head can be installed away from the display to monitor remote or adjacent areas.
Sampling is performed by natural diffusion, without a pump, and the device features a 4 - 20 mA analog output and an RS485 MODBUS digital output. The enclosure is made of cast aluminum alloy, and the device is dustproof, waterproof, and flameproof. A calibration certificate is included.
- Detectable gases: CO2, CO
- Installation type: Wall-mounted, fixed
- Sensor head cable length: 10 ft
- Sampling method: Natural diffusion
- Signal outputs: 4 - 20 mA analog, RS485 MODBUS digital
- Electrical outputs: 2 relay contacts, maximum power of 50 W per relay
- Alarm: LED and buzzer
- Buzzer volume: ≥ 85 dB at a distance of 1 m
- Response time: < 60 seconds
- Error: ≤ ± 5% F.S.
- Operating pressure: 1.0 bar nominal, range of 0.8 to 1.2 bar
- Calibration interval: 12 months
- Sensor life: 2 - 3 years for catalytic and electrochemical sensors, over 5 years for NDIR CO2 sensors
- Operating and storage temperature: −18 to 50 °C
- Operating and storage humidity: < 95% RH
- Explosion protection: ATEX Ex d ⅡC T6 Gb
- Protection rating: IP65
- Power supply: DC 24 V ±15%, 100–240 V AC, 50/60 Hz
- Maximum power consumption: 20 W
- Dimensions: 20 × 18 × 9 cm
- Weight: 1.4 kg
- Threads: G1/2 male pipe thread, M20 × 1.5 mm
- Enclosure material: Cast aluminum alloy
- Package contents: Fixed gas detector with remote sensor head, user manual, remote control with battery, HEX key for removing the cover, 24 V power adapter for connection to a 110 V outlet, 10 ft sensor head extension cable, calibration certificate
- Type of Gas
- CO2, CO
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.