Dulux Trade Satinwood is a solvent-based satin enamel for interior wood and metal surfaces, such as doors, door frames, skirting boards and railings. It forms a hard-wearing finish that resists dirt and usually does not require an undercoat. It withstands temperatures of up to 90 °C, mild chemical fumes and normal indoor humidity.
Apply by brush or roller, usually in two coats. The surface must be sound, clean, dry and free from dust, grease or wax. Prime new or bare surfaces with a suitable primer. If making a significant colour change, apply one coat of Dulux Trade Undercoat in a suitable shade. Stir well before use and do not apply at temperatures below 5 °C. White may yellow over time, particularly in areas with little light.
- Type: Solvent-based enamel
- Surfaces: Wood and metal
- Use: Interior
- Colour: White
- Finish: Satin
- Quantity: 1 lt
- Coverage: Up to 17 m²/lt per coat
- Touch dry: 4–6 hours
- Recoating time: 16–24 hours
- Temperature resistance: Up to 90 °C
- Application temperature: From 5 °C
- Wet film thickness: 50 μm
- Dry film thickness: 25 μm
- Volume solids: 60% for white
- VOC: Up to 300 g/l
- Application: By brush or roller
Product Details
- Type
- Wood, Metal
- Type
- Ripolin
- Colour
- White
- Quantity in lt
- 1 lt
Especially
- Finish
- Satin
- Acrilyc
- No
- Water
- No
- Solvent
- No
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.