254
90
€
Delivery
by Mon, 16 Nov
Free
shipping cost
From
mollaoglou.gr
Description
Specifications
Berling solvent-based enamel is a single-component alkyd coating for metal and steel surfaces. It is touch-dry in 20–25 minutes at 23 °C and can be recoated after 1–3 hours or, alternatively, after 24 hours with alkyd enamels.
Apply with a brush, roller or airless spray gun. Before application, the surface must be clean, dry and free of stains, grease or dust. On new surfaces, apply a quick-drying primer first.
- Type: Single-component, solvent-based alkyd enamel
- Suitable surfaces: Metal and steel
- Colour: White
- Touch-dry time: 20–25 minutes at 23 °C
- Through-dry time: At least 4 hours
- Recoating: After 1–3 hours, or after 24 hours with alkyd enamels
- Full cure: At least 7 days
- Coverage: 12–14 m²/l per coat, at a wet film thickness of 80 μm
- Thinning: 5–10% by volume or 4–9% by weight with Thinner E
- Application methods: Brush, roller or airless spray gun
- Surface preparation: Sandblasting or mechanical methods, such as an abrasive wheel
- Application and curing temperature: 12–30 °C
- Application and curing humidity: Up to 75%
- Specific gravity: 1.25–1.29 g/cm³ (white, ISO 2811)
- Solids: 62 ± 2% by weight
- Viscosity: 105–110 KU at 25 °C
- VOC: Up to 490 g/l (2004/42/EC, category θ)
- Mechanical resistance: Very good
- Weather resistance: High
- Adhesion: Very good
- Hiding power: High
Product Details
- Type
- Metal
- Type
- Varnish Colour
- Colour
- White
Especially
- Acrilyc
- No
- Water
- No
- Solvent
- Yes
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.