88
90
€
Delivery
by Wed, 18 Nov
3,50 €
Do you want it with Free shipping?
From
mollaoglou.gr
Description
Specifications
The transparent, two-component Isomat DUROFLOOR-PSF epoxy system is used as a primer for cement-based surfaces and as a sealing coating for cement-based floors. It is solvent-free and resistant to water, acids, alkalis, petroleum products and salt solutions.
It is also used to prepare resin mortars with quartz sand and a crack-filling compound. Its classification according to EN 13813 is SR-B2,0-AR0,5-IR4, and it has Environmental Product Declaration EPD-IES-0016841.
- Type: Transparent, two-component epoxy system
- Weight: 3.42 kg
- Colour: Transparent
- Chemical base: Two-component epoxy resin
- Use: Primer for cement-based surfaces, floor sealing coating, preparation of resin mortars and crack filling
- Mixing ratio A:B: 100:46 by weight
- Viscosity: 710 mPa·s at +23 °C
- Density: 1.07 kg/l
- Pot life: Approximately 35 min at +20 °C
- Minimum curing temperature: +8 °C
- Shore D hardness: 83
- Time before foot traffic and recoating: 20 h at +23 °C
- Compressive strength: ≥ 55 N/mm² after 7 days at +23 °C
- Flexural strength: ≥ 35 N/mm²
- Adhesion strength: ≥ 3 N/mm²
- Impact resistance: IR 4
- Abrasion resistance: AR 0.5 / 60 mg
- Reaction to fire: Ffl
- Classification according to EN 13813: SR-B2,0-AR0,5-IR4
- Environmental declaration: EPD-IES-0016841
Specifications
- Type
- Floor Painting
- Colour
- Transparent
- Acrilyc
- No
Quantity
- Weight
- 3.42 kg
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.