253
90
€
Livrare
până la mie, 18 noi
Gratuită
costul de livrare
De la
mollaoglou.gr
Descriere
Specificații
Isomat DUROFLOOR-SLF floor coating is a two-component, self-levelling epoxy system for cast coatings on cement-based floors. With the addition of M32 quartz sand, it is suitable for areas subject to high mechanical and chemical demands, such as industrial facilities, warehouses, garages, workshops, laboratories and hospitals.
It has high hardness and abrasion resistance, and withstands organic and inorganic acids, alkalis, petroleum products, seawater and many solvents. Its temperature resistance ranges from -30 °C to +100 °C under dry loading and up to +60 °C under wet loading.
- Type: Two-component, self-levelling epoxy system
- Colour: Grey (RAL 7040)
- Weight: 16.13 kg
- Chemical base: Epoxy resin
- Solids content: Approximately 100%
- Mixing ratio A:B: 100:24 by weight
- Density A+B: 1.40 kg/l
- Density A+B with M32 sand: 1.75 kg/l
- Pot life: Approximately 25 minutes at +20 °C
- Minimum curing temperature: +8 °C
- Shore D hardness: 80
- Walkability: After 24 hours at +23 °C
- Waiting time between coats: 24 hours at +23 °C
- Time to reach final strengths: 7 days at +23 °C
- Compressive strength: ≥ 45 N/mm²
- Flexural strength: ≥ 20 N/mm²
- Adhesion strength: ≥ 3 N/mm²
- Consumption: 0.85 kg/m²/mm plus 0.85 kg/m²/mm of quartz sand, at a 1:1 ratio
- Fire behaviour: Bfl-s1 according to EN 13501-1
- Certification: CE according to EN 1504-2
- Classification: SR-B2,0-AR0,5-IR4 according to EN 13813
- Environmental declaration: EPD
Caracteristici
- Tip
- Culoarea pardoselilor
- Culoare Full Face
- Gri
- Acrilic
- Nu
Cantitate
- Greutate
- 16,13 kg
Informații importante
Specificațiile sunt colectate de pe site-urile oficiale ale producătorilor. Te rugăm să verifici specificațiile înainte de a finaliza comanda. În cazul în care întâmpini probleme, raportează aici.