283
90
€
Livrare
până la mie, 18 noi
Gratuită
costul de livrare
De la
mollaoglou.gr
Descriere
Specificații
Isomat’s transparent epoxy system DUROFLOOR-PSF is a solvent-free, two-component product for priming and sealing cement-based floors. It is also used to prepare resin mortars with quartz sand and crack-filling material. It offers high hardness and abrasion resistance, and is resistant to water, acids, alkalis, petroleum products and salt solutions.
For priming, apply one coat with a brush or roller, then apply the next DUROFLOOR system within 24 hours. For sealing, apply two coats; quartz sand can be broadcast between them to create a non-slip surface. Its classification under EN 13813 is SR-B2,0-AR0,5-IR4, and it has an Environmental Product Declaration (EPD-IES-0016841).
- Type: Transparent, two-component epoxy system
- Weight: 10 kg
- Chemical base: Epoxy resin
- Solvent content: Solvent-free
- Uses: Priming and sealing cement-based floors, preparing resin mortars and crack-filling material
- Mixing ratio (A:B): 100:46 by weight
- Pot life: Approximately 35 min at +20 °C
- Minimum curing temperature: +8 °C
- Shore D hardness: 83
- Foot traffic and recoating: After 20 h at +23 °C
- Compressive strength: ≥ 55 N/mm² after 7 days at +23 °C
- Flexural strength: ≥ 35 N/mm²
- Adhesion strength: ≥ 3 N/mm²
- Impact resistance: IR 4
- Abrasion resistance: AR 0,5 / 60 mg
- Reaction to fire: Ffl
- Classification under EN 13813: SR-B2,0-AR0,5-IR4
- Environmental declaration: EPD-IES-0016841
Caracteristici
- Tip
- Culoarea pardoselilor
- Culoare Full Face
- Transparent
- Acrilic
- Nu
Cantitate
- Greutate
- 10 kg
Informații importante
Specificațiile sunt colectate de pe site-urile oficiale ale producătorilor. Te rugăm să verifici specificațiile înainte de a finaliza comanda. În cazul în care întâmpini probleme, raportează aici.