666
90
€
Delivery
by Wed, 18 Nov
10,00 €
Do you want it with Free shipping?
From
mollaoglou.gr
Description
Specifications
The two-component transparent epoxy system Isomat DUROFLOOR-PSF is used as a primer and as a sealing coating on cement-based floors. It is solvent-free and resistant to abrasion, water, acids, alkalis, petroleum products and salt solutions.
It is also used to prepare resin mortars with quartz sand and a crack-filling material. For a non-slip surface, quartz sand is broadcast between the two sealing coats.
- Type: Two-component epoxy system
- Colour: Transparent
- Weight: 25 kg
- Chemical base: Epoxy resin
- Mixing ratio (A:B): 100:46 by weight
- Pot life: Approximately 35 min at +20 °C
- Minimum curing temperature: +8 °C
- Shore D hardness: 83
- Foot traffic and recoating: After 20 h at +23 °C
- Compressive strength: ≥ 55 N/mm² after 7 days at +23 °C
- Flexural strength: ≥ 35 N/mm²
- Adhesion strength: ≥ 3 N/mm²
- Impact resistance: IR 4
- Abrasion resistance: AR 0,5 / 60 mg
- Reaction to fire: Ffl
- Classification: SR-B2,0-AR0,5-IR4 according to EN 13813
- Environmental declaration: EPD-IES-0016841
- Application: One coat for priming or two coats for sealing
- Consumption for priming: 200–300 g/m²
- Consumption for sealing: 200–250 g/m² per coat
Specifications
- Type
- Floor Painting
- Colour
- Transparent
- Acrilyc
- No
Quantity
- Weight
- 25 kg
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.