136
90
€
Delivery
by Wed, 18 Nov
3,50 €
Do you want it with Free shipping?
From
mollaoglou.gr
Description
Specifications
Isomat Epoxycoat-VSF protective coating is a solvent-free, two-component epoxy paint for surfaces exposed to chemical agents. It is used as a protective and decorative coating on concrete, plaster, cement screeds, and metal. It has high hardness and abrasion resistance, as well as resistance to acids, alkalis, petroleum products, solvents, water, and seawater.
The paint is certified for use on surfaces that come into contact with food and carries CE certification as a concrete surface protection product in accordance with EN 1504-2. Apply with a roller, brush, or spray gun in at least two coats, applying the second coat within 24 hours of the first.
- Type: Protective paint
- Weight: 2.3 kg
- Color: Multicolor
- Chemical base: Two-component epoxy resin
- Solvent content: Solvent-free
- Volume solids: Approximately 91%
- Mixing ratio A:B: 77:23 by weight
- Viscosity: 1,550 mPa·s at +23°C
- Density: 1.30 kg/l
- Pot life: Approximately 20 minutes at +23°C
- Minimum curing temperature: +8°C
- Time before foot traffic and recoating: 24 hours at +23°C
- Abrasion resistance: 3 N/mm² (concrete failure)
- Consumption: 200–300 g/m² per coat
- Application temperature: +15°C to +25°C
- Application: At least two coats applied with a roller, brush, or spray gun
- Time between coats: Up to 24 hours
- Substrates: Concrete, plaster, cement screeds, and metal surfaces
- Certification: CE marking in accordance with EN 1504-2
- Food contact: Suitable for surfaces that come into contact with food
- Tool cleaning: Clean with SM-27 thinner immediately after use
Specifications
- Type
- Protective Paint
- Colour
- Multicolour
- Acrilyc
- No
Quantity
- Weight
- 2.3 kg
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.