230
90
€
Delivery
by Wed, 18 Nov
Free
shipping cost
From
mollaoglou.gr
Description
Specifications
Isomat EPOXYCOAT-VSF epoxy paint is a two-component, solvent-free product. It is used as a protective and decorative coating on concrete, plaster, cement screeds, and metal surfaces in areas such as factories, laboratories, wineries, gas stations, and workshops. It is suitable for surfaces exposed to severe chemical stress and is certified for use on surfaces that come into contact with food.
- Type: Two-component epoxy paint
- Solvents: Solvent-free
- Colour: RAL 7032 (pebble grey)
- Weight: 7.7 kg
- Volume solids: Approximately 91%
- Hardness: High
- Abrasion resistance: 3 N/mm² (concrete failure)
- Resistance: To acids, alkalis, petroleum products, solvents, water, and seawater
- Certification: CE-marked as a concrete surface protection product in accordance with EN 1504-2
- Mixing ratio A:B: 77:23 by weight
- Viscosity: 1,550 mPa·s (+23 °C)
- Density: 1.30 kg/l
- Pot life: Approximately 20 minutes (+23 °C)
- Minimum curing temperature: +8 °C
- Walk-on and recoating time: After 24 hours (+23 °C)
- Consumption: 200–300 g/m² per coat
- Application: By roller, brush, or spray, in at least two coats
- Time between coats: Apply the second coat within 24 hours of the first
- Application temperature: +15 °C to +25 °C
- Protection from moisture: Approximately 4–6 hours
- Tool cleaning: Immediately after use with SM-27 solvent
Specifications
- Type
- Protective Paint
- Colour
- Multicolour
- Acrilyc
- No
Quantity
- Weight
- 7.7 kg
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.