116
90
€
Delivery
by Wed, 18 Nov
3,50 €
Do you want it with Free shipping?
From
mollaoglou.gr
Description
Specifications
Isomat DUROFLOOR-PSF transparent floor coating is a solvent-free, two-component epoxy system used as a primer and sealing coating on cement-based floors. It has high hardness and abrasion resistance, and is resistant to water, acids, alkalis, petroleum products and salt solutions. It is also used to prepare resin mortars with quartz sand and crack-filling material.
- Use: Priming and sealing cement-based floors, preparing resin mortars and filling cracks
- Chemical base: Two-component epoxy resin
- Colour: Transparent
- Weight: 3.15 kg
- Mixing ratio: 100:46 by weight (A:B)
- Pot life: Approximately 35 min at +20 °C
- Minimum curing temperature: +8 °C
- Shore hardness: 83 Shore D
- Compressive strength: ≥ 55 N/mm²
- Flexural strength: ≥ 35 N/mm²
- Adhesion strength: ≥ 3 N/mm²
- Impact resistance: IR 4
- Abrasion resistance: AR 0.5 / 60 mg
- Reaction to fire: Ffl
- Classification: SR-B2.0-AR0.5-IR4 according to EN 13813
- Environmental declaration: EPD-IES-0016841
Specifications
- Type
- Floor Painting
- Colour
- Transparent
- Acrilyc
- No
Quantity
- Weight
- 3.15 kg
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.