Structural Adhesives

Isomat Ak 15 Tile Adhesive

Isomat Ak 15 tile adhesive is a resin-modified, cement-based adhesive reinforced with polymers. It is classified as C2 E according to EN 12004 and has an open time of at least 30 minutes. It is...

Isomat Ak 15 tile adhesive is a resin-modified, cement-based adhesive reinforced with polymers. It is classified as C2 E according to EN 12004 and has an open time of at least 30 minutes. It is suitable for absorbent and non-absorbent tiles, such as granite tiles, on interior and exterior walls and floors.

It can be applied to concrete, brickwork and plaster...

See Description & Specifications See Description & Specifications
22 90 €
Delivery by Mon, 30 Nov
13,00 €   shipping cost
From mollaoglou.gr
Ξάνθη, Ξάνθης
10 pieces
See Construction Materials on the page of mollaoglou.gr
What if I want to return it?

You can return it for free within 14 days. We will come to your place, return it for free, and you will get your money back.

Questions

Description & Specifications

Isomat Ak 15 tile adhesive is a resin-modified, cement-based adhesive reinforced with polymers. It is classified as C2 E according to EN 12004 and has an open time of at least 30 minutes. It is suitable for absorbent and non-absorbent tiles, such as granite tiles, on interior and exterior walls and floors.

It can be applied to concrete, brickwork and plaster surfaces. The surface must be clean and free of dust, grease, paint and loose material. Damping the substrate before application is recommended. Highly porous surfaces, such as aerated concrete, plasterboard and particleboard, should first be primed with UNI-PRIMER. For substrates subject to vibration or significant expansion and contraction, the adhesive must be made flexible by adding up to 3.50 kg of ADIFLEX-B per 25 kg of adhesive.

  • Type: Tile adhesive
  • Quantity: 25 kg
  • Colour: White
  • Form: Cement-based mortar
  • Reinforcement: Polymers
  • Classification: C2 E according to EN 12004
  • Open time: At least 30 minutes
  • Adjustment time: At least 30 minutes
  • Pot life: At least 6 hours
  • Application thickness: Up to 10 mm
  • Water requirement: 6.75–7.25 L per 25 kg bag
  • Consumption: 1.5–4.0 kg/m², depending on the trowel notch size and substrate
  • Initial and final bond strength: High
  • Moisture resistance: High
  • Adhesion after 28 days: ≥ 1.20 N/mm²
  • Adhesion after heating to +70 °C, immersion in water or 25 freeze-thaw cycles: ≥ 1.00 N/mm² in each case
  • Temperature resistance: -30 °C to +90 °C
  • Application temperature: +5 °C to +35 °C
  • Grouting on walls: After 3–8 hours
  • Grouting on floors: After 24 hours
  • Shelf life: 12 months from the date of manufacture when stored in a place protected from moisture and frost

Manufacturer

Type
Tiles
Quantity
25 kg
Colour
White

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

22,90 €
13,00 €   shipping cost