Putty Fillers

Isomat Multifill-diamond 1-12 Mm Tile Joint Filler 4 Kg Grey

Isomat Multifill-Diamond 1-12 is a coloured grout with resins and rapid setting, for joints 1–12 mm wide in tiles and natural stone. It contains no Portland cement and provides a uniform colour...

Isomat Multifill-Diamond 1-12 is a coloured grout with resins and rapid setting, for joints 1–12 mm wide in tiles and natural stone. It contains no Portland cement and provides a uniform colour without salt stains or colour variations. It is water-repellent and contains bacteriostatic agents that prevent bacterial growth in the joints.

It is suitable for...

See Description & Specifications See Description & Specifications
18 90 €
Delivery by Mon, 30 Nov
3,50 €   shipping cost
From mollaoglou.gr
Ξάνθη, Ξάνθης
10 pieces
See Construction Materials on the page of mollaoglou.gr
Questions

Description & Specifications

Isomat Multifill-Diamond 1-12 is a coloured grout with resins and rapid setting, for joints 1–12 mm wide in tiles and natural stone. It contains no Portland cement and provides a uniform colour without salt stains or colour variations. It is water-repellent and contains bacteriostatic agents that prevent bacterial growth in the joints.

It is suitable for indoor and outdoor use, including kitchens, bathrooms, balconies and swimming pools. To apply, dampen the joints with a wet sponge and mix the grout with water using a drill at low speed. After leaving it to mature for approximately 3 minutes and mixing again, spread it diagonally with a rubber float; remove excess grout with a damp sponge.

  • Type: Grout
  • Weight: 4 kg
  • Colour: Grey
  • Joint width: 1–12 mm
  • Composition: With resins, without Portland cement
  • Standard: CG2 WA, EN 13888
  • Setting: Rapid
  • Water repellency: Very high, with a beading effect
  • Shrinkage resistance: Does not shrink
  • Compressive strength: 25 N/mm² after 28 days
  • Flexural strength: 7 N/mm² after 28 days
  • Pot life: At least 50 minutes at +20 °C
  • Mixing water: 0.90–1.00 l per 4 kg package
  • Consumption: 0.2–2.0 kg/m²
  • Application temperature: +5 °C to +35 °C

Manufacturer

Dimensions

Type
Tile Joint Filler
Attributes
Water
Colour
Grey
Type
Liquid
Application Surface
Plasterboard
Sanding Capability
No
No Shrinkage / Crack Resistance
Yes

Quantity

Weight
4 kg

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

18,90 €
3,50 €   shipping cost