Well guys, coming from a noctua nh-c14s which was an amazing air cooling solution, I have to say that the implementation of the evga (their first attempt at CPU liquid cooling) is top-notch...
As an example, with the nh-c14s and prime95 (20 minutes blend test) on the ryzen 7 2700x overclocked to 4.2 with 1.35v (which is generally hot, I must say), I had a max temperature of 79-80 degrees with a room temperature of 25 degrees.
In a silverstone rl06 case with 6 noctua nf-p12 fans...
In the same scenario with the evga clc 240 liquid cooler with its fans at 1400 RPM, I have a max temperature of 68 degrees... about 12 degrees lower than a top air cooling solution, which is quite impressive...
The build quality is simply top-notch, its tubes are flexible, and it has RGB lighting. The installation is relatively easy if you have some experience with this hobby...
Now let's move on to the negatives...
For no reason, do not go above 1400 RPM on the fans (via its software).
The noise is unbearable and there is little difference in performance... Personally, I would recommend using quieter fans, if possible, something like Noctua would be good. Be careful, to have control over the fans, you need to enable the PWM profile in your BIOS...
The second negative point (although it didn't bother me much) is that the evga flow control app does not provide accurate temperatures for Ryzen. No matter what you do, it will show temperatures of 100+ degrees, so you simply check the temperature with another program (hw monitor, core temp, etc.). Obviously, it doesn't communicate correctly with the Ryzen sensors.
**Something I forgot... make sure to set the pump RPM in the flow control app to around the high point of 80-90%.
At a price below 100 euros, you won't find anything better in terms of liquid cooling... (except for the Korpi bottle!!)
*update 1/8/19
With the Ryzen 5 3600, everything is fine now and the temperatures shown in the app are accurate
Λοιπόν μάγκες, προερχόμενος απο μια noctua nh-c14s που ήταν τρομερή αερόψυξη, εχω να πώ οτι η υλοποίηση της evga (η πρώτη της απόπειρα μάλιστα για υδρόψυξη επεξεργαστή) ειναι κορυφαία...
Ενδεικτικα με την nh-c14s με prime95 (20 λεπτά blend test) στον ryzen 7 2700x oc στα 4.2 με 1,35v (o οποίος ειναι θερμός να σας πω γενικα) είχα max temp 79-80 βαθμούς με θερμοκρασία δωματίου 25 βαθμούς
σε κουτί silverstone rl06 με 6 ανεμιστηράκια noctua nf-p12 ..
Στο ίδο σενάριο με την evga clc 240 liquid με τα fan της στις 1400 στροφές εχω max 68 βαθμους.. κοντά 12 βαθμούς κάτω απο μια κορυφαία αερόψυξη, δεν τους λές και λίγους..
Ποιότητα κατασκευής απλά κορυφαία, ευλύγιστοι οι σωλήνες της, +στο rgb της και εύκολη σχετικά εγκατάσταση αν έχεις λίγη εμπειρία με το άθλημα..
Πάμε στα αρνητικά...
Για κανένα λόγo μην πάτε πάνω απο τις 1400 στροφές στους ανεμιστήρες της (μεσω του software της)
απλα δεν παλεύεται ο θόρυβος και μικρή διαφορα στις επιδόσεις... Προσωπικά θα σας έλεγα να βάλετε πιο αθόρυβους ανεμιστήρες, αν μπορείτε κατι σε noctua καλα θα ήταν. Προσοχή για να έχετε τον έλεγχο των fans, πρέπει να ενεργοποιήσετε το pwm profile απο το bios σας..
Δεύτερο αρνητικό (αν και δεν με πείραξε τοσο) το evga flow control (app) σε ryzen έστω δεν δίνει σωστές θερμοκρασίες, οτι και να κάνεις θα λεει 100+ βαθμούς, οπότε απλά ελέγχεις την θερμοκρασία με αλλο προγραμματάκι (hw monitor, core temp, κλπ) προφανώς δεν "μιλάει" σωστά με τους sensors των ryzen.
**Κάτι που ξέχασα.. το pump rpm στο flow control να το εχετε κόντα στο high point 80-90%
Σε τιμη κάτω του 100αρικου, δεν βρίσκεις κάτι καλύτερο σε νερό..(μόνο το μπουκαλάκι Κορπή!!)
*update 1/8/19
Με το ryzen 5 3600 πλέον κομπλέ και οι αναγραφομενες θερμοκρασίες στο app