Ceresit CR65 waterproof cementitious coating in a 25kg bag. It is a rigid cementitious waterproof coating, consisting of a mixture of cement with inorganic fillers and modifiers.

Consumption: For a layer thickness of 2.0-3.0mm, approximately 2.0-4.0 kg/m² is required.

CERESIT CR65 is suitable for waterproofing horizontal and vertical surfaces of buildings, structural elements, and tanks. It is used for internal waterproofing of monolithic tanks, potable water tanks, and pools with a water depth of 10m.

It is also suitable for retroactive waterproofing of old buildings or structural elements on the negative water pressure side. It can be applied to rigid, crack-free surfaces made of concrete, bricks, and mortars. In the case of mechanical loads applied to the application surface, the surface must be protected.

• One component
• Vapor permeable
• Frost resistant
• Suitable for potable water tanks
• Increases surface protection
• Improves surface strength with varied qualities and structures of concrete
• Cost-effective application
• Application with brush, trowel, or spray
• Resistant to negative water pressure

• For horizontal and vertical surfaces of buildings, structural elements, and tanks
• For monolithic water tanks and pools with a water depth of 10m
• For potable water tanks
• For retroactive waterproofing of buildings on the negative water pressure side
• For filling holes/cavities of drilling
• On cementitious substrates ready for coating, non-shrinking, non-deformable, and salt-free