The water heater from Tesy has a capacity of 80 liters, a power of 4 kW, and can be installed vertically on the wall.
It operates with electric energy, where the resistance inside the water heater is heated, thus heating the water.

Based on the capacity in liters, it can meet the needs of a small family of 3 people and the water heats up in almost an hour. Generally, the most common size of a water heater is 80 liters.

The water storage tank has an internal enamel coating, which is formed by applying enamel (glass) on metal. This results in protection against rust, as the water does not come into contact with the walls, ensuring always clean water.

Connected to the water supply, and for every quantity of hot water used, there is automatic replenishment with cold water.
To limit heat losses that occur during the water's journey, it is advisable to install it as close as possible to the place where it will be used. If installed inside the bathroom, certain safety measures and distances must always be observed.

Finally, maintenance must be done every 1-2 years to prevent salt accumulation. Vertical placement provides easier maintenance, but care must be taken when installing the base on the wall.

• Nominal Capacity: 80lt
• Power: 4kW
• Height: 74cm
• Width: 44cm
• Length: 44cm