ISOMAT AK 9 is a cement-based tile adhesive. It provides high initial and final bonding strength and moisture resistance. It is classified as a C1 type adhesive according to EN 12004.
Fields of application:
- Suitable for bonding ceramic tiles, wall or floor, on surfaces made of concrete, brickwork, plaster, etc.
- Applicable in both indoor and outdoor spaces.
Technical characteristics:
- Form: cementitious powder
- Shades: grey, white
- Water requirement: 6.00 l/bag 25 kg
- Application temperature: from +5ºC to +35ºC
- Application thickness: up to 10 mm
- Pot life: at least 6 h
- Open time: at least 20 min
- Adjustability time: at least 30 min
- Grouting on walls: after 3-8 h
- Grouting on floors: after 24 h
- Adhesion after: • 28 days: ≥ 1.00 N/mm2 • heating at +70ºC: ≥ 0.50 N/mm2 • immersion in water: ≥ 0.50 N/mm2 • 25 freeze-thaw cycles: ≥ 0.50 N/mm2
- Temperature resistance: from -15ºC to +60ºC Measurements were made according to EN 12004.
Consumption:
1.5-4.0 kg/m2, depending on the size of the notches, the trowel, and the type of substrate
Shelf life - Storage:
12 months from the production date, stored in the original, sealed packaging, in a place protected from moisture and frost.
Remarks:
• The product contains cement, which reacts alkalinely with water and is classified as an irritant. • Very porous surfaces, such as aerated concrete, plasterboards, chipboards, etc., should be primed initially with the acrylic primer UNIPRIMER.
• Consult the safety instructions and precautions listed on the packaging.
9 Coins
To earn Skroutz Coins, join Skroutz Plus and accept the terms of the reward program.
