The water storage tank features an internal stainless steel coating. This results in long-lasting durability, as it prevents corrosion and rust formation, ensuring clean water at all times.
Tank
The water storage tank features an internal stainless steel coating. This results in long-lasting durability, as it prevents corrosion and rust formation, ensuring clean water at all times.
Tank technical specifications
- Thermal tank made of stainless steel 316 L HiMo.
- Heat exchanger made of stainless steel 316 L HiMo.
- Thermal tank insulation (polyurethane 70mm, 35-40kg/m³).
- External cover of the thermal tank made of non-magnetic stainless steel 304 BA.
- Safety valve (relief valve).
- Specially constructed electric resistance, anti-corrosive, with safety thermostat.
- Anti-corrosive (anodic) protection.
- Hot water outlet.
- Closed circuit pipe.
- Cold water inlet (water supply network) with 10atm safety valve.
Collector
The collector has a surface area of 2.7m², capable of producing up to 270 liters of hot water. It is selective, the type most commonly used in solar water heaters in recent years. It has lower heat losses compared to a simple collector, thus offering higher efficiency.
Collector Technical Specifications
- Frame and back of the collector made of anodized aluminum
- Collector surface with blue selective coating made of 0.5mm thick selective aluminum sheets, welded with laser technology.
- Hydraulic skeleton entirely made of copper
- Fiberglass insulation at the back with a thickness of 50mm and rock wool insulation on the sides with a thickness of 20mm.
- Absorption coefficient α ≥ 0.95 ± 0.02
- Emission coefficient of selective surface ε ≤ 0.05 ± 0.02
Dual Energy
It is dual-energy, meaning it can operate in two ways: with solar or with electric energy. This means that inside the water tank there is an electric resistance, so on days with little sunshine due to cloudiness, you can operate your solar water heater with electric energy and always have hot water.
Solar Water Heater Maintenance
Regular maintenance of the solar water heater optimizes the quality, hygiene, and operational performance, while also saving on energy consumption. For the smooth operation of the solar water heater, regular maintenance by a specialized team is required. The necessary actions during the maintenance of the solar water heater are:
- Checking the level of solar fluids & refilling where necessary.
- Inspecting and repairing the insulation on the local solar pipes.
- Checking and replacing the magnesium anode to prevent the formation of salts inside the solar water heater.
- Inspecting and cleaning the electric resistance.
- Nominal Capacity
- 160 lt
- Container Material
- Inox
- Operation Mode
- Double Energy
- Collector Type
- Selective
- Titanium Collector
- No
- Collector Surface
- 2.7 m²
- Roof Tile
- No
- Low Height
- No
- Horizontal Collector
- No
- Compact
- No
- Heat Pump
- No
- Wi-Fi
- No
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.
Be the first to leave a comment!