5 minutes installation. 15 degrees down immediately.

very good, it's just that on my motherboard the bottom part of the cooler touches the pci-e, so I only installed the top part, there is a difference in the disk's temperature.

On Lexar NM790 SSD 1TB M.2 NVMe PCI Express 4.0 from 60-65 degrees steadily to 35. I carefully removed the aluminum tape from the drive and stuck the heatsink directly onto the M2. The drive is in a mini PC that operates as a server for various tasks and works 24/7.

I installed it in a PS5, easy installation/application.
I have no data on its performance in heat dissipation.

Very satisfied.
In a stress test, it dropped the temperature of the Samsung 990 pro 4TB sensor 2 (NAND) from 71 to 57! Idle is at 43.
Installation was very easy, it even has a magnetized screwdriver that holds the screw for the motherboard just fine.

Easy installation on a Lexar NM790 and it fit into a PS5 slim. It also came with a small screwdriver in the package. Let's hope it keeps the temperature low on the SSD. It seems to be of good quality, though. Time will tell.

It definitely helps, but on disks with "elevated" temperatures, you won't see any drastic drop, that is, more than 10°C.

Purchased in late January 2024 for €10 final price including shipping. It cools a Kingston NV2 1TB which is installed on a PCIe Card (installed like a sandwich with the drive in the middle) and is used solely for gaming with BeamNG.Drive & Hogwarts Legacy. With a room temperature of 20.5 degrees Celsius (winter), the drive sits at 26 degrees Celsius when idle and reaches 38 degrees Celsius after a 3-hour gaming session with the aforementioned games. The build quality is at the high standards that we are accustomed to from Be Quiet, and I definitely recommend the MC1 to anyone looking for a value-for-money NVMe cooling solution. The most demanding users might want to take a look at the MC1 Pro, which has a copper pipe inside the heatsink or something with active cooling afterwards. I will choose it again in the future unless something changes, in which case I will mention it here.

Very good, I recommend it!

Excellent product, at least in my system I use it on the Kingston NV2 SSD 1TB M.2 NVMe PCI Express 4.0, where it maintains temperatures at around 30 degrees in idle. I haven't done any stress tests, so I can't give an opinion. However, it is worth buying because compared to another cooling solution I have on another NVMe, the difference is 5 to 10 degrees higher (icy box). The evaluation was done with temperatures in idle. Thank you for your time

It's been great so far when combined with an SSD that I installed in a PS5. Sturdy and solid construction with a very nice and practical case that contained the heatsink, thermal pads, screws for fastening, and a small screwdriver. I would buy it again. It's worth its money!

It comes with a magnetic screwdriver and screw, and it is easy to install.

If you have 2 M.2 slots that are close to each other, they cannot fit 2 together.

It is excellent, it maintains very good temperatures and I have installed it on an NVMe SSD Adata legend 960 4Tb, there is also the relevant video here...

https://youtu.be/RWGYvOGfQsw?si=GzB24-LyVJu1itg3

Regards,
Costas Infinity Games

With regular use, I did not see a temperature decrease of more than 2-3 degrees, but under workload it maintained a noticeably lower and stable temperature

It was installed initially for purely aesthetic reasons, I did not expect it to lower my disk temperature by 20 degrees!! Easy to install, and at an excellent price, I highly recommend it!

Hello everyone, the cooler is good and it has a temperature difference with the motherboard cooler that was factory-installed, about four to five degrees. These measurements were taken after testing the disk speed (CrystalDiskMark). The disk works at 100% there and that's where you can see the real temperatures. I think if you get the Be Quiet Cooling pro cooler, it might be even better.

Economical, efficient. Even with heavy use of NVMe (Kingston KC3000 1TB PCI Express 4.0), the temperature reaches up to 40 degrees.

Very high-quality shield, it doesn't seem to show in the photo but it comes in a box with the heatsink, as well as a backplate to also put on the back with thermal padding. 4 screws to screw the 2 pieces together and make a sandwich with the nvme, and it even comes with a screwdriver!

I bought it for a Kingston nv2 for the ps5. WARNING ONLY THIS ONE FITS IN A ps5 and not the pro

Tremendous, I have installed the top part on my ThinkPad t480 laptop and it has a difference of 6°C in the Max, the min doesn't count because the measurement was done with the supply of cooling liquid, but I saw a tremendous difference everywhere, it's a shame that the pro doesn't fit in mine

It was installed on an MB GB B460 AORUS Pro in the 2nd slot for NVME with a Samsung 970 Evo Plus 500gb. The temperatures are at the same levels as the first SSD (exactly the same) with the motherboard's heatsink, even though the first one has the operating system and applications.
Edit: 24/6/23
With the installation of a graphics card in the system, the temperatures on the disks have varied significantly, with the MC1 managing to keep the disk 4-5 degrees lower than the one with the motherboard's heatsink.

Excellent Performance. I had a second thought "why didn't I choose the pro version, around 5 euros more expensive", which now, with the temperatures I see, has vanished.

I was surprised by the packaging. It includes everything needed to install the disk on the cooler.
The cooler is of high quality and its installation is easy. It is positive that the disk goes inside it and does not simply touch it from above the NVMe.
If you have a motherboard without a cooler for NVMe or without a cooler for a second NVMe and you need one, it is definitely one of the best choices.

Edit:
I come back to inform you that the cooler fits normally, without any problem with NVMe on Playstation 5.

Very good cooler, does exactly what it promises. Two were purchased, one disk has been showing 29-30 degrees Celsius at idle since then, and the other, which is warmer, shows 38-39 degrees. They don't go above 50-55 degrees in benchmarking, meaning super safe temperatures for NVMe disks. Affordable, beautiful, easy to install, and keeps your disk cool. Highly recommended!

Super product, it matched perfectly with the WD ssd m.2 for the ps5. The positive thing is that it has small screws instead of rubber bands to attach it securely to the disk.
There is also a video on YouTube for you to watch.

Visually, it appears to be a high-quality construction made of aluminum with a top and bottom base and the corresponding thermally conductive adhesive pads. The heatsink has thermal pads for both sides of the disk and installation is easy. The feeling is that the heatsink does its job very well, it looks elegant and of good quality. It is worth the money and is recommended.

I can't say how well it does its job, after all, I'm not inside the "case" where I installed it on the SSD memory card in the PS5, the only thing for sure is that it had a perfect fit and was very easy to put on the card from both sides. Obviously, it will do a great job for which I bought it...

This particular product was purchased to be installed in a Samsung 980 Pro NVMe SSD, which in turn was placed inside a PS5 for storage expansion, where it fit perfectly. I cannot know the temperatures that the SSD holds because I do not have measuring instruments, but visually it appears to be a quality construction made of aluminum with top and bottom base and the corresponding thermal adhesive pads.

The heatsink is compatible with the PS5 and very high quality for its price. It fits perfectly and the blade locks in for proper airflow.