E-Cigarette Vape Tanks

Hellvape Dead Rabbit V3 Electronic Cigarette Vaporizer RDA 24mm Silver

Hellvape presents the V3 version of the very famous Dead Rabbit! The Dead Rabbit V3 RDA has a diameter of 24 mm, the dripper can be installed on most boxes and mods on the market. The Dead Rabbit V3...

Hellvape presents the V3 version of the very famous Dead Rabbit! The Dead Rabbit V3 RDA has a diameter of 24 mm, the dripper can be installed on most boxes and mods on the market. The Dead Rabbit V3 features finishes that are close to perfection. Hellvape allows vapers to have excellent products at an unbeatable price. 

The Dead Rabbit V3 has a large and...

See full description See full description
25,65 €
25 37
-1%
expires in 1 month
26 Coins 26 Coins
Delivery by Wed, 24 Jun
2,50 € to a Skroutz Point
Do you want it Tomorrow with Free shipping?
From Atmi-zo 4.9 (63)
Ίλιον, Αττικής
In-store pickup available
1 piece
See E-Cigarette on the page of Atmi-zo
What if it breaks?

You have at least a 2-year warranty. Contact us by phone and we will immediately take care of the repair, replacement or refund of your money, completely free of charge.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Description

Description

Hellvape presents the V3 version of the very famous Dead Rabbit! The Dead Rabbit V3 RDA has a diameter of 24 mm, the dripper can be installed on most boxes and mods on the market. The Dead Rabbit V3 features finishes that are close to perfection. Hellvape allows vapers to have excellent products at an unbeatable price. 

The Dead Rabbit V3 has a large and innovative deck with four diagonal mounting positions for easy installation of large diameter dual coils. To fully utilize the Dead Rabbit V3, Hellvape has equipped its RDA with adjustable airflow. The Dead Rabbit V3 fits perfectly with bottom feeders and bottom feeders with BF pin.

Manufacturer

See full description

Specifications

Specifications

Type
RDA
MTL
No
DL
Yes
Diameter
24 mm

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (10)

Reviews

  1. 10
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • Variety of spare parts/accessories
  • Value for money
  • Construction quality
  • Capacity
  • Does it fill easily?
  • Waterproofness
  • Air flow
  • Ease of use

Reviews photos

Reviews photos
Reviews photos
Reviews photos
Reviews photos
Reviews photos

Reviews by our members

  • the_one2738
    5
    1 out of 4 members found this review helpful
    This review is about the manufacturer colour: Matte Full Black

    This baby is perfect, I highly recommend it, there is no chance it won't leave you satisfied

    Translated from Greek ·
    • Variety of spare parts/accessories
    • Value for money
    • Construction quality
    • Capacity
    • Does it fill relatively easily?
    • Waterproofness
    • Air flow
    Did you find this review helpful?
  • Tyson Fury
    5
    3 out of 4 members found this review helpful

    What can we say now,
    With about 20 euros, no one can do the job.
    Let others ask for 200 euros for an RDA....
    Buy them with your eyes closed and don't waste your money....
    P.S. if you like this kind of vaping, of course

    Translated from Greek ·
    • Construction quality
    • Capacity
    • Does it fill easily?
    • Waterproofness
    • Air flow
    • Ease of use
    • Variety of spare parts/accessories
    • Value for money
    Did you find this review helpful?
  • Homer_J_Simpson
    5
    9 out of 10 members found this review helpful
    This review is about the manufacturer colour: Matte Full Black

    I am a beginner in RDAs. I installed the coils and cotton, but the liquid was spitting upwards like crazy. Later, I learned that I had used too much cotton and filled the entire deck with it, when in fact the cotton should only touch the deck to avoid oversaturation and spitting, as shown in the coil building video I provided. I trimmed the excess cotton (without replacing it) and the situation improved significantly after a few puffs. The method below also helped me a lot with the common issue beginners face with rebuildable coils, as if the wick sits inactive at the beginning, it will still spit. The YouTube video mentions the same thing at the beginning. So, with the method below, it works perfectly. Lower wattages can also lead to boiling of the liquid instead of quick vaporization. With the coils I have, I set it to 24W. Rebuildable coils, dripping, and the wide 810 drip tip can lead to spitback, especially for beginners.

    "Regarding over saturation, a pro tip I picked up from Reddit to help fix this issue if you’re experiencing this: if your device has an air flow adjuster, set it to full open and then activate the device and blow INTO it instead of drawing out the vapor. The vapor will disperse through the air flow and if you do this a few times it should help to clear out some of the oversaturated juice."

    Experienced users know this, but even pre-built coils need a little adjustment of the legs when placing them on the posts with a screwdriver, otherwise they touch each other. The coils were labeled above 0.37Ω, so my device recognized them as parallel coils at around 0.19Ω (depending on the placement height). Finally, the part of the atomizer with the logo (the rabbit) has two notches on the inner side that allow for a 90-degree movement in relation to the deck, so that the airflow aligns parallel to the coils and doesn't get blocked by the cotton.

    Coming from the Innokin Zlide, I have to say that I enjoy a better flavor. It is also difficult to burn the liquid if I increase the wattage a bit, as the cotton wicks a good amount of liquid. And with the Innokin, of course, if we stick to the recommended wattage by the coil manufacturer, we don't get a burnt taste.

    I didn't even buy a dripping bottle, as I had a glass caramel bottle with a dropper from a store that sells herbal extracts, and I ran out of extract at some point. For transferring, I use a plastic pipette for DIY liquid

    Translated from Greek ·
    • Construction quality
    • Capacity
    • Does it fill easily?
    • Waterproofness
    • Air flow
    • Variety of spare parts/accessories
    • Value for money
    • Ease of use
    Did you find this review helpful?
  • konrou
    5
    3 out of 3 members found this review helpful
    This review is about the manufacturer colour: Matte Full Black

    Whatever Hellvape has released is a guarantee. Quality construction, very easy resistance setup, and overall ease of use.

    Perfect flavor and airflow options.

    5/5 easily

    Translated from Greek ·
    • Construction quality
    • Capacity
    • Does it fill easily?
    • Waterproofness
    • Air flow
    • Ease of use
    • Variety of spare parts/accessories
    • Value for money
    Did you find this review helpful?
  • FunkyFox
    5
    6 out of 6 members found this review helpful

    Verified purchase

    This review is about the manufacturer colour: Matte Full Black

    My first RDA and I can say that I am very satisfied. It is very easy to set up and has 2 airflow options (open and honeycomb).

    The only problem I had was the "muted" flavor and maybe my setup played a role. The simple Kanthal wire did not give me a strong flavor, as well as the placement I did by putting the coils relatively high. I did some research and found that due to its airflow, it requires a lower setup (just enough for the coils not to touch the bottom). Also, I tried the pre-made fused clapton coils and the flavor is great.

    I highly recommend it, but along with a fused clapton wire for better flavor.

    Translated from Greek ·
    • Construction quality
    • Capacity
    • Does it fill easily?
    • Waterproofness
    • Air flow
    • Ease of use
    • Variety of spare parts/accessories
    • Value for money
    Did you find this review helpful?
  • jefris_1
    5
    2 out of 3 members found this review helpful

    Verified purchase

    This review is about the manufacturer colour: Matte Full Black

    Very good RDA, as an owner of the dead rabbit RDA I would say that if you have the V2, it's not worth getting it. However, in general, it is excellent if you are coming from another one, especially if it's not a dripper.

    Translated from Greek ·
    • Construction quality
    • Capacity
    • Does it fill easily?
    • Waterproofness
    • Air flow
    • Variety of spare parts/accessories
    • Value for money
    • Ease of use
    Did you find this review helpful?
  • Παντελής Κ.
    5
    4 out of 4 members found this review helpful

    Verified purchase

    This review is about the manufacturer colour: Gun Metal

    Another unique product from Hellvape that doesn't disappoint me! Very smooth draw with satisfactory space for further dripping, with the ability to use squonk and a very nice and sturdy construction! The honeycomb style airflow is on point, just like the slot airflow! Beautiful design and ideal for drippers enthusiasts!

    A M A Z I N G - G E T I T N O W !!!!

    Translated from Greek ·
    • Construction quality
    • Capacity
    • Does it fill easily?
    • Waterproofness
    • Air flow
    • Ease of use
    • Variety of spare parts/accessories
    • Value for money
    Did you find this review helpful?
  • Flawless vaporizer, very easy to set up, produces a lot of vapor with VG. Many airflow options.

    Translated from Greek ·
    Did you find this review helpful?
  • Verified purchase

    This review is about the manufacturer colour: Matte Full Black

    • Construction quality
    • Capacity
    • Does it fill easily?
    • Waterproofness
    • Air flow
    • Ease of use
    • Variety of spare parts/accessories
    • Value for money
  • This baby is perfect, I highly recommend it, there is no chance it won't leave you satisfied

    Translated from Greek ·
    1
  • What can we say now,
    With about 20 euros, no one can do the job.
    Let others ask for 200 euros for an RDA....
    Buy them with your eyes closed and don't waste your money....
    P.S. if you like this kind of vaping, of course

    Translated from Greek ·
    3
  • I am a beginner in RDAs. I installed the coils and cotton, but the liquid was spitting upwards like crazy. Later, I learned that I had used too much cotton and filled the entire deck with it, when in fact the cotton should only touch the deck to avoid oversaturation and spitting, as shown in the coil building video I provided. I trimmed the excess cotton (without replacing it) and the situation improved significantly after a few puffs. The method below also helped me a lot with the common issue beginners face with rebuildable coils, as if the wick sits inactive at the beginning, it will still spit. The YouTube video mentions the same thing at the beginning. So, with the method below, it works perfectly. Lower wattages can also lead to boiling of the liquid instead of quick vaporization. With the coils I have, I set it to 24W. Rebuildable coils, dripping, and the wide 810 drip tip can lead to spitback, especially for beginners.

    "Regarding over saturation, a pro tip I picked up from Reddit to help fix this issue if you’re experiencing this: if your device has an air flow adjuster, set it to full open and then activate the device and blow INTO it instead of drawing out the vapor. The vapor will disperse through the air flow and if you do this a few times it should help to clear out some of the oversaturated juice."

    Experienced users know this, but even pre-built coils need a little adjustment of the legs when placing them on the posts with a screwdriver, otherwise they touch each other. The coils were labeled above 0.37Ω, so my device recognized them as parallel coils at around 0.19Ω (depending on the placement height). Finally, the part of the atomizer with the logo (the rabbit) has two notches on the inner side that allow for a 90-degree movement in relation to the deck, so that the airflow aligns parallel to the coils and doesn't get blocked by the cotton.

    Coming from the Innokin Zlide, I have to say that I enjoy a better flavor. It is also difficult to burn the liquid if I increase the wattage a bit, as the cotton wicks a good amount of liquid. And with the Innokin, of course, if we stick to the recommended wattage by the coil manufacturer, we don't get a burnt taste.

    I didn't even buy a dripping bottle, as I had a glass caramel bottle with a dropper from a store that sells herbal extracts, and I ran out of extract at some point. For transferring, I use a plastic pipette for DIY liquid

    Translated from Greek ·
    9
  • Whatever Hellvape has released is a guarantee. Quality construction, very easy resistance setup, and overall ease of use.

    Perfect flavor and airflow options.

    5/5 easily

    Translated from Greek ·
    3
  • My first RDA and I can say that I am very satisfied. It is very easy to set up and has 2 airflow options (open and honeycomb).

    The only problem I had was the "muted" flavor and maybe my setup played a role. The simple Kanthal wire did not give me a strong flavor, as well as the placement I did by putting the coils relatively high. I did some research and found that due to its airflow, it requires a lower setup (just enough for the coils not to touch the bottom). Also, I tried the pre-made fused clapton coils and the flavor is great.

    I highly recommend it, but along with a fused clapton wire for better flavor.

    Translated from Greek ·
    6
  • See all
Questions (3)

Questions

22 users have this product and can help you

Ask for the product
Tyson Fury
See all questions (3)

Description & Specifications

Hellvape presents the V3 version of the very famous Dead Rabbit! The Dead Rabbit V3 RDA has a diameter of 24 mm, the dripper can be installed on most boxes and mods on the market. The Dead Rabbit V3 features finishes that are close to perfection. Hellvape allows vapers to have excellent products at an unbeatable price. 

The Dead Rabbit V3 has a large and innovative deck with four diagonal mounting positions for easy installation of large diameter dual coils. To fully utilize the Dead Rabbit V3, Hellvape has equipped its RDA with adjustable airflow. The Dead Rabbit V3 fits perfectly with bottom feeders and bottom feeders with BF pin.

Manufacturer

Type
RDA
MTL
No
DL
Yes
Diameter
24 mm

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (10)

  1. 10
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • Variety of spare parts/accessories
  • Value for money
  • Construction quality
  • Capacity
  • Does it fill easily?
  • Waterproofness
  • Air flow
  • Ease of use

Reviews photos

Reviews photos
Reviews photos
Reviews photos
Reviews photos
Reviews photos

Reviews by our members

  • the_one2738
    5
    1 out of 4 members found this review helpful
    This review is about the manufacturer colour: Matte Full Black

    This baby is perfect, I highly recommend it, there is no chance it won't leave you satisfied

    Translated from Greek ·
    • Variety of spare parts/accessories
    • Value for money
    • Construction quality
    • Capacity
    • Does it fill relatively easily?
    • Waterproofness
    • Air flow
    Did you find this review helpful?
  • Tyson Fury
    5
    3 out of 4 members found this review helpful

    What can we say now,
    With about 20 euros, no one can do the job.
    Let others ask for 200 euros for an RDA....
    Buy them with your eyes closed and don't waste your money....
    P.S. if you like this kind of vaping, of course

    Translated from Greek ·
    • Construction quality
    • Capacity
    • Does it fill easily?
    • Waterproofness
    • Air flow
    • Ease of use
    • Variety of spare parts/accessories
    • Value for money
    Did you find this review helpful?
  • Homer_J_Simpson
    5
    9 out of 10 members found this review helpful
    This review is about the manufacturer colour: Matte Full Black

    I am a beginner in RDAs. I installed the coils and cotton, but the liquid was spitting upwards like crazy. Later, I learned that I had used too much cotton and filled the entire deck with it, when in fact the cotton should only touch the deck to avoid oversaturation and spitting, as shown in the coil building video I provided. I trimmed the excess cotton (without replacing it) and the situation improved significantly after a few puffs. The method below also helped me a lot with the common issue beginners face with rebuildable coils, as if the wick sits inactive at the beginning, it will still spit. The YouTube video mentions the same thing at the beginning. So, with the method below, it works perfectly. Lower wattages can also lead to boiling of the liquid instead of quick vaporization. With the coils I have, I set it to 24W. Rebuildable coils, dripping, and the wide 810 drip tip can lead to spitback, especially for beginners.

    "Regarding over saturation, a pro tip I picked up from Reddit to help fix this issue if you’re experiencing this: if your device has an air flow adjuster, set it to full open and then activate the device and blow INTO it instead of drawing out the vapor. The vapor will disperse through the air flow and if you do this a few times it should help to clear out some of the oversaturated juice."

    Experienced users know this, but even pre-built coils need a little adjustment of the legs when placing them on the posts with a screwdriver, otherwise they touch each other. The coils were labeled above 0.37Ω, so my device recognized them as parallel coils at around 0.19Ω (depending on the placement height). Finally, the part of the atomizer with the logo (the rabbit) has two notches on the inner side that allow for a 90-degree movement in relation to the deck, so that the airflow aligns parallel to the coils and doesn't get blocked by the cotton.

    Coming from the Innokin Zlide, I have to say that I enjoy a better flavor. It is also difficult to burn the liquid if I increase the wattage a bit, as the cotton wicks a good amount of liquid. And with the Innokin, of course, if we stick to the recommended wattage by the coil manufacturer, we don't get a burnt taste.

    I didn't even buy a dripping bottle, as I had a glass caramel bottle with a dropper from a store that sells herbal extracts, and I ran out of extract at some point. For transferring, I use a plastic pipette for DIY liquid

    Translated from Greek ·
    • Construction quality
    • Capacity
    • Does it fill easily?
    • Waterproofness
    • Air flow
    • Variety of spare parts/accessories
    • Value for money
    • Ease of use
    Did you find this review helpful?
  • konrou
    5
    3 out of 3 members found this review helpful
    This review is about the manufacturer colour: Matte Full Black

    Whatever Hellvape has released is a guarantee. Quality construction, very easy resistance setup, and overall ease of use.

    Perfect flavor and airflow options.

    5/5 easily

    Translated from Greek ·
    • Construction quality
    • Capacity
    • Does it fill easily?
    • Waterproofness
    • Air flow
    • Ease of use
    • Variety of spare parts/accessories
    • Value for money
    Did you find this review helpful?
  • FunkyFox
    5
    6 out of 6 members found this review helpful

    Verified purchase

    This review is about the manufacturer colour: Matte Full Black

    My first RDA and I can say that I am very satisfied. It is very easy to set up and has 2 airflow options (open and honeycomb).

    The only problem I had was the "muted" flavor and maybe my setup played a role. The simple Kanthal wire did not give me a strong flavor, as well as the placement I did by putting the coils relatively high. I did some research and found that due to its airflow, it requires a lower setup (just enough for the coils not to touch the bottom). Also, I tried the pre-made fused clapton coils and the flavor is great.

    I highly recommend it, but along with a fused clapton wire for better flavor.

    Translated from Greek ·
    • Construction quality
    • Capacity
    • Does it fill easily?
    • Waterproofness
    • Air flow
    • Ease of use
    • Variety of spare parts/accessories
    • Value for money
    Did you find this review helpful?
  • jefris_1
    5
    2 out of 3 members found this review helpful

    Verified purchase

    This review is about the manufacturer colour: Matte Full Black

    Very good RDA, as an owner of the dead rabbit RDA I would say that if you have the V2, it's not worth getting it. However, in general, it is excellent if you are coming from another one, especially if it's not a dripper.

    Translated from Greek ·
    • Construction quality
    • Capacity
    • Does it fill easily?
    • Waterproofness
    • Air flow
    • Variety of spare parts/accessories
    • Value for money
    • Ease of use
    Did you find this review helpful?
  • Παντελής Κ.
    5
    4 out of 4 members found this review helpful

    Verified purchase

    This review is about the manufacturer colour: Gun Metal

    Another unique product from Hellvape that doesn't disappoint me! Very smooth draw with satisfactory space for further dripping, with the ability to use squonk and a very nice and sturdy construction! The honeycomb style airflow is on point, just like the slot airflow! Beautiful design and ideal for drippers enthusiasts!

    A M A Z I N G - G E T I T N O W !!!!

    Translated from Greek ·
    • Construction quality
    • Capacity
    • Does it fill easily?
    • Waterproofness
    • Air flow
    • Ease of use
    • Variety of spare parts/accessories
    • Value for money
    Did you find this review helpful?
  • Flawless vaporizer, very easy to set up, produces a lot of vapor with VG. Many airflow options.

    Translated from Greek ·
    Did you find this review helpful?
  • Verified purchase

    This review is about the manufacturer colour: Matte Full Black

    • Construction quality
    • Capacity
    • Does it fill easily?
    • Waterproofness
    • Air flow
    • Ease of use
    • Variety of spare parts/accessories
    • Value for money
  • This baby is perfect, I highly recommend it, there is no chance it won't leave you satisfied

    Translated from Greek ·
    1
  • What can we say now,
    With about 20 euros, no one can do the job.
    Let others ask for 200 euros for an RDA....
    Buy them with your eyes closed and don't waste your money....
    P.S. if you like this kind of vaping, of course

    Translated from Greek ·
    3
  • I am a beginner in RDAs. I installed the coils and cotton, but the liquid was spitting upwards like crazy. Later, I learned that I had used too much cotton and filled the entire deck with it, when in fact the cotton should only touch the deck to avoid oversaturation and spitting, as shown in the coil building video I provided. I trimmed the excess cotton (without replacing it) and the situation improved significantly after a few puffs. The method below also helped me a lot with the common issue beginners face with rebuildable coils, as if the wick sits inactive at the beginning, it will still spit. The YouTube video mentions the same thing at the beginning. So, with the method below, it works perfectly. Lower wattages can also lead to boiling of the liquid instead of quick vaporization. With the coils I have, I set it to 24W. Rebuildable coils, dripping, and the wide 810 drip tip can lead to spitback, especially for beginners.

    "Regarding over saturation, a pro tip I picked up from Reddit to help fix this issue if you’re experiencing this: if your device has an air flow adjuster, set it to full open and then activate the device and blow INTO it instead of drawing out the vapor. The vapor will disperse through the air flow and if you do this a few times it should help to clear out some of the oversaturated juice."

    Experienced users know this, but even pre-built coils need a little adjustment of the legs when placing them on the posts with a screwdriver, otherwise they touch each other. The coils were labeled above 0.37Ω, so my device recognized them as parallel coils at around 0.19Ω (depending on the placement height). Finally, the part of the atomizer with the logo (the rabbit) has two notches on the inner side that allow for a 90-degree movement in relation to the deck, so that the airflow aligns parallel to the coils and doesn't get blocked by the cotton.

    Coming from the Innokin Zlide, I have to say that I enjoy a better flavor. It is also difficult to burn the liquid if I increase the wattage a bit, as the cotton wicks a good amount of liquid. And with the Innokin, of course, if we stick to the recommended wattage by the coil manufacturer, we don't get a burnt taste.

    I didn't even buy a dripping bottle, as I had a glass caramel bottle with a dropper from a store that sells herbal extracts, and I ran out of extract at some point. For transferring, I use a plastic pipette for DIY liquid

    Translated from Greek ·
    9
  • Whatever Hellvape has released is a guarantee. Quality construction, very easy resistance setup, and overall ease of use.

    Perfect flavor and airflow options.

    5/5 easily

    Translated from Greek ·
    3
  • My first RDA and I can say that I am very satisfied. It is very easy to set up and has 2 airflow options (open and honeycomb).

    The only problem I had was the "muted" flavor and maybe my setup played a role. The simple Kanthal wire did not give me a strong flavor, as well as the placement I did by putting the coils relatively high. I did some research and found that due to its airflow, it requires a lower setup (just enough for the coils not to touch the bottom). Also, I tried the pre-made fused clapton coils and the flavor is great.

    I highly recommend it, but along with a fused clapton wire for better flavor.

    Translated from Greek ·
    6
  • See all
25,37 €
2,50 € to a Skroutz Point