Sufficient for viewing, good antenna and its program strictly (TVR 5).
To change the order of the channels and arrange them as you wish, open the Guide, select the channel you want, and with Ctrl + up arrow or Ctrl + down arrow you set the order you want.

I have connected it to a Raspberry Pi, running TvHeadend (streaming live digital television inside and outside the house), and it works flawlessly. Recommended!

While using another USB tuner in the same socket with the same high-quality cable, I have 100% signal without any interruptions after many hours of recording. However, with this one, even though the signal indicator shows 100%, it constantly breaks. ProgDVB is used for recording

Bad experience.
In windows it doesn't play correctly, the image and sound have a lot of interruptions, not only when I watch live but also the recording has the same problem. I tried it on a pc and on a laptop (new) with the same results.
In linux, although it recognizes it as a device, when I ran TVHeadend in the channel search it didn't find anything!

#Some useful information (update 8/12/2024)#

Interface: USB 2.0
Chipset: Rafael Micro R828D
Antenna connector: BLC
Supported codecs: MPEG-2, H.264, H.265, HEVC
Supported TV standards: DVB-T / T2 / C
Supported radio standards: FM, DAB, DAB +, VHF, UHF
Frequency range: 24 - 1766 MHz

You can find the Drivers, TVRplayer, and audio/video decoders (LAV Filters) for Windows 10/11 below:

#Official Sites#
https://www.rebelelectro.com/kom1060
http://www.astrometa.com.tw/integrated_en.html

a) Certified Driver for Windows 10, 11 64bit
https://www.dropbox.com/s/nggcmw3uewduchp/AMDVBT2_Setup_200917.exe
b) Application Software: TVR 5.0.0
https://www.dropbox.com/s/0kcc1ltvo2uje4j/TVR_Setup_5.0.0.exe
c) K-Lite Codec Pack Mega (with LAV Filters)
https://codecguide.com/download_k-lite_codec_pack_mega.htm

The Rebel KOM 1060 is recognized in Windows as Astrometa DVB-T2 Device and contains two Demodulators that receive and process the signal. The first is the RTL 2832U (Realtek) for Radio Support (FM/DAB/DAB+) and the second is the CXD2837 (Sony) for TV Tuner (DVB-T/T2/C).

In Linux Mint, it is recognized as 15f4:0131 HanfTek Astrometa DVB-T/T2/C FM & DAB receiver [RTL2832P] and is supported with the Digital TV of "Kaffeine" (https://apps.kde.org/el/kaffeine/).

The Rebel requires a very good antenna signal (SNR above 20db). The small antenna from the kit does not provide such a signal. If you experience picture/sound breakups, you need a stronger and higher quality signal. A better type of external or internal powered antenna will help improve the signal quality. In other words, you need:
RF Power (Radio Frequency Power) ≥ 90
SNR (Signal to Noise Ratio) ≥ 20

You can check the above from the Hardware Diagnostic with Alt+Shift+Ctrl+D within TVRplayer 5.0. All settings (Setup) are displayed with "E".

#WARNING#
If picture/sound breakups continue, disable hardware acceleration DxVA from the Hardware Diagnostic or Video Acceleration from the TVRplayer menu or HW Decoding of Codec H.264 from Lav Video (LAV Filters).

#Official Sites#
https://www.rebelelectro.com/kom1060
http://www.astrometa.com.tw/integrated_en.html

#For advanced users#
"Drivers for FM player & DAB Player"
https://www.ukwtv.de/cms/index.php?option=com_content&view=article&id=281&Itemid=550&jsmallfib=1&dir=JSROOT/dabplayer&download_file=JSROOT/dabplayer/Treiber4.zip
"DAB+ Player (Digital Radio) & "FM player""
https://www.ukwtv.de/cms/downloads-aside/281-dab-player-von-andreas-gsinn.html

#For more advanced users#
SDR-Radio
The best free SDR software for Airspy and RTL-SDR
HDSDR (High Definition Software Defined Radio)
Hardware specific DLL
Zadig: http://zadig.akeo.ie
How-To: http://hdsdr.de/RTLSDR_with_HDSDR.pdf

##Disclaimer##
Use the above information at your own risk. I do not assume or bear any responsibility for any malfunction or extensive damage to electronic devices and operating systems.