Car Battery Jump Starter Cables JUMPER 600A 4.5M.

• Cable Length: 450 cm
• Current Capacity: 600A
• Cable Thickness: 9.5 mm
• Cross-Section: 25 mm²
• Colors: 1 red cable (+), 1 black cable (-/ground)

Jump starter cable options: Follow the rule that the thicker the cables, the better the current conductivity. The core cross-section is the key, not the insulation. The thicker the cable, the higher the voltage it can withstand and the lower the current losses. The cross-section of jump starter cables should be at least:

• 16 mm² for gasoline vehicles with cable length of 4–5 meters,
• 25 mm² for cables longer than 5 meters or for diesel vehicles,
• 35 mm² for vehicles with large engines or jump cables longer than 6 meters.

Additionally, a larger core cross-section is required for longer cables, as higher electrical resistance is related to the distance the current travels, causing a voltage drop. Jump start cables should not be too short, as this makes connecting to the battery difficult, which is often located in hard-to-reach places. Another important factor is the maximum current capacity. Cheaper products typically handle around 200A, which is often insufficient (especially for larger vehicles and diesel engines). Lastly, the clips (surfaces) should be handcrafted from durable material and remain intact even if dropped.

Suitable for use in:

• Van
• Passenger cars
• Excavators
• Agricultural tractors
• Agricultural machinery
• Off-road vehicles
• ATVs
• Cabins

Includes:

• 600A 4.5M jump starter cables
• Convenient carrying bag