The company, for me, is one of the most reliable in terms of budget PC cases in recent years. I would like to start by saying that this specific compact case is a great value for money for a low-cost build (up to 500 euros by Summer 2023). For someone with experience in building, the 30-35 euros for the case are just fine. Beginners might find it difficult because it is a small case with limited space.
Some tips:
- Front fans are definitely needed (at least one), it can also fit 140mm fans (I installed two) comfortably, and the airflow with the stock rear fan that comes with the case is more than satisfactory. FIRST, screw the fans in the front and then install the motherboard, etc., because it will be difficult to screw them in later, there is not enough space for your hand.
- If you have liquid cooling (up to 240mm, not more), it will only fit in the front after considering the size of your graphics card. You can find the dimensions in the product description. I do not recommend liquid cooling for beginners in this case.
- I would not put a fan on top, most likely it will interfere with the motherboard and won't offer much. There is no magnetic dust filter. Avoid it.
- The build quality is proportional to the cost, it won't break easily, but it needs attention not to bend (top part, supports for graphics card). Also, make sure to remove the (non-reusable) brackets before installing the motherboard to avoid damaging it later, they are harder to remove than usual.
- The front HDD tray can be removed or, better yet, used to hide the extra PSU cables. Avoid putting HDD and SSD there, it will make things difficult. In general, avoid HDDs... it's 2023. I added a custom SSD bracket from OCZ in the front (with a screw from below) to hide the cable management even better.
- It has satisfactory space for cable management at the back, it won't be too difficult to close the lid. If you don't have a modular PSU, gather the extra cables and place them in the HDD tray below. The rest can easily be managed at the back.
- If you have dust filters from previous cases, they can be easily installed with a little DIY to save yourself from dust. I prefer good airflow and cleaning more frequently.
For up to 35 euros with shipping, I highly recommend it to those who have average knowledge in computer building. It will fit nicely in an office and won't take up much space. I wouldn't recommend it for expensive systems (over 500 euros).
* Update April 2024: After 50 euros, look at the competition! They have even better cases, including from the same company.
** I don't know why, but I can't add photos (the system doesn't load).
H εταιρια για μενα ειναι μια απο τις πιο αξιοπιστες ως προς το Budget pc case τα τελευταια χρονια. Ξεκιναω γενικα να πω οτι το συγκεκριμενο -κομπακτ- κουτι ειναι VFM για low cost build (εως 500ευρω Καλοκαιρι 2023) Για καποιον που εχει σχετικη εμπειρια στο χτισιμο , τα 30-35 ευρω για το κουτι ειναι μια χαρα. Οι παρχαριοι ισως δυσκολευτουν γιατι κατα τα αλλα ειναι ενα μικρο κουτι με περιορισμενους χωρους.
Καποια tips :
- Σιγουρα χρειαζονται μπροστα fans (ενα τουλαχιστον), παιρνει ΚΑΙ 140αρηδες (εγω δυο εβαλα) με ανεση και το air flow με το πισω στοκ fan που ερχεται μαζι το κουτι , ειναι κατι παραπανω απο ικανοποιητικο. ΠΡΩΤΑ βιδωστε τα φανς μπροστα και μετα βαλτε μητρικη κλπ γιατι θα δυσκολευτειτε στο βιδωμα , δεν εχει χωρο για το χερι.
- Εαν εχετε υδροψυξη (μεχρι 240 οχι παραπανω) θα μπει ΜΠΡΟΣΤΑ μονο και αυτο αφου υπολογισετε και την καρτα γραφικων που εχετε. Τις διαστασεις μπορειτε να τις βρειτε στην περιγραφη του προιοντος. Δεν συνιστω υδροψυξη στο συγκεκριμενο κουτι για τους αρχαριους.
- Επανω δεν θα εβαζα fan , κατα πασα πιθανοτητα θα βρισκει στην μητρικη και δε θα προσφερει πολλα. Δεν υπαρχει μαγνητικο φιλτρο σκονης. Αποφυγετε το.
- Η ποιοτητα κατασκευης ειναι αναλογη του κοστους, δε θα σπασει κιολας αλλα θελει προσοχη να μη λυγισει ( επανω μερος, στηριγματα για καρτα γραφικων). Επισης φροντιστε να βγαλετε τα (μη επαναχρησιμοποιουμενα) λαμακια πριν τοποθετησετε καν την μητρικη, για να αποφυγετε να την πληγωσετε μετα , βγαιουν πιο δυσκολα απο το κανονικο.
- Το HDD tray που εχει μπροστα αφαιρεται Η - καλυτερα- το χρησιμοποιειται για να κρυψετε τα παραπανισια καλωδια του τροφοδοτικου. Αποφυγετε να βαλετε HDD και SSD εκει , θα σας δυσκολεψει. Γενικα αποφυγετε HDD... 2023 εχουμε. Εγω προσθεσα -πατεντα- μια βαση για SSD της OCZ μπροστα (με βιδα που εχει απο κατω) για να κρυβει ακομα καλυτερα το cable management.
- Εχει ικανοποιητικο χωρο για cable management πισω , δεν θα δυσκολευτει ιδιαιτερα να κλεισει το καπακι. Αν δεν εχετε modular τροφοδοτικο , μαζεψτε τα περισσια καλωδια και τοποθετειστε τα στο HDD tray απο κατω. Τα υπολοιπα ευκολα πιανονται πισω.
- Εαν εχετε -απο παλιοτερα κουτια ισως- dust filters , μπορει να μπουν ευκολα με πατεντα ωστε να γλυτωσετε σκονη. Εγω προτιμω το air flow και να καθαριζω πιο συχνα.
Μεχρι 35 ευρω με μεταφορικα , το συστηνω ανεπιφυλακτα σε οσους εχουν average γνωση στο χτισιμο υπολογιστη. Θα ταιριαξει ωραια στο γραφειο και δε θα πιασει πολυ χωρο. Δε θα το προτεινα για ακριβα συστηματα (ανω των 500 ευρω)
* Update Απριλιος 2024; Μετα τα 50 ευρω, κοιταξτε τον ανταγωνισμο !εχει και καλυτερα κουτακια ακομα και η ιδια η εταιρεια.
** Δεν γνωριζω γιατι , αλλα δεν μπορω (δεν φορτωνει το συστημα) να προσθεσω φωτογραφιες.
Be the first to leave a comment!