Skroutz.gr

FFG 251 KD Welding Machine Inverter MIG / TIG / MMA with Maximum Welding Current 250A and Duty Cycle 60%
Welding Machines

FFG 251 KD Welding Machine Inverter MIG / TIG / MMA with Maximum Welding Current 250A and Duty Cycle 60%

MIG/STICK 251 KD Welding Inverter (MIG / MMA / TIG)

Features

  • Nominal voltage: 230 V | 50 Hz
  • Type: Wire & Electrode
  • Welding current range (MIG): 30 - 250 A
  • Welding current range (MMA): 20 - 200 A
  • ...

MIG/STICK 251 KD Welding Inverter (MIG / MMA / TIG)

Features

  • Nominal voltage: 230 V | 50 Hz
  • Type: Wire & Electrode
  • Welding current range (MIG): 30 - 250 A
  • Welding current range (MMA): 20 - 200 A
  • Welding current range (TIG): 15 - 250 A
  • Power: 10.3 kVA
  • Max. absorbed current: 45 A
  • No-load voltage (Uo): 65 V
  • Wire feed speed: 2 - 18 m/min
  • Cooling type: Air
  • ...
See full description See full description

Top specs

  • Welding Current

    250

    Suitable for professional use on thick metals, such as steel or cast iron constructions.

  • Duty Cycle

    The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

    2.

    For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.

  • Power Supply Voltage

    230

    It is the supply voltage that the machine requires from the electrical grid.

  • Power

    10.3

    Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.
  • See all
1207 00 €

10% cashback with Eurobank card

1,21€ cashback in Coins 1,21€ cashback in Coins
Delivery by Tue, 20 Oct
18,80 €  

Reduced Shipping

For purchases from Skroutz a discount is applied for this particular product.

Learn more
Delivery to your floor available
Do you want it with Free shipping?
From MdTools 5.0 (47)
5.0 (47 reviews)
Μενεμένη, Θεσσαλονίκης
In-store pickup available
See Tools on the page of MdTools
What if it breaks?

You're covered by the statutory 2-year warranty. Contact us and we'll handle the entire process with the store, ensuring your issue is resolved with prompt support through a repair, replacement, or refund.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come and pick it up (completely free of charge if you have Skroutz Plus) and refund your money.

Review the product
Product report

Description

Description

MIG/STICK 251 KD Welding Inverter (MIG / MMA / TIG)

Features

  • Nominal voltage: 230 V | 50 Hz
  • Type: Wire & Electrode
  • Welding current range (MIG): 30 - 250 A
  • Welding current range (MMA): 20 - 200 A
  • Welding current range (TIG): 15 - 250 A
  • Power: 10.3 kVA
  • Max. absorbed current: 45 A
  • No-load voltage (Uo): 65 V
  • Wire feed speed: 2 - 18 m/min
  • Cooling type: Air
  • Method: MIG | MMA | TIG
  • Duty cycle (MIG): 60%: 250A | 100%: 192A
  • Duty cycle (MMA): 60%: 200A | 100%: 154A
  • Duty cycle (TIG): 60%: 250A | 100%: 192A
  • Protection level: IP21S
  • Cable: 3 m
  • Dimensions (LxWxH): 62.1x30.0x68.1 cm
  • Weight: 49.5 kg

Description

Heavy-duty multi-task semi-automatic welding inverter, suitable for methods: MIG, MMA, and Lift TIG. Advanced IGBT technology. Timer, 2T / 4T function, gas control, high and low gas pressure control, gas non-return valves, optional capability for aluminum welding. Hot arc start (HOT START), ANTI-STICK technology, arc force adjustment (ARC FORCE). Ampere adjustment potentiometer (A), thermal protection (THERMAL PROTECTION), 35-70 machine quick connectors, digital display. Digital control. LED indicators for power, overload, and under/over-voltage. Compliant with: EN IEC 60974-1. Enclosure protection IP21S. Ergonomic handle and transport wheels. Suitable for use with a generator.

Included

  • MIG 25A air-cooled clamp 4m (BINZEL MB24)
  • Ground clamp 4mx25mm² with clamp and 35-70 quick connection
  • Gas hose 4m with connection
  • 3 nozzles (0.8, 1.0, 1.2)
  • 2 rollers with 2 sides (0.8mm - 1mm)

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
MIG, TIG, MMA

Type

MIG

The easiest welding method even for a beginner. 2. If the wire to be used does not have a special coating (flux), it should be connected to an external gas cylinder (e.g. argon, CO2).

TIG

Slow welding for detailed work on aluminum and stainless steel, mainly. Requires experience and connection to an external gas cylinder. Does not create "spatters".

MMA

Creates thick and strong bonds without the need for external gas supply, making it ideal for out-of-lab welding.
Welding Current (max)
250 A

Welding Current (max): 250


Suitable for professional use on thick metals, such as steel or cast iron constructions.
Operation Cycle (max Ampere)
60 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Supply Voltage
230 V

Supply Voltage: 230


It is the supply voltage that the machine requires from the electrical grid.
Power
10.3 kVA

Power: 10.3


Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.
Weight
49500 gr

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
Yes

IGBT


Allows the conversion of direct current (DC) voltage to alternating current (AC) or the output of direct current at a higher or lower intensity.
VRD
No
with Voltage Stabilizer
No
for Generator with AVR
No

Features

Hot Start
Yes

Hot Start


Temporarily increases the current intensity at the moment of welding initiation.
Anti Stick
Yes

Anti Stick


Cuts off the current if the electrode sticks to the metal, to prevent it from burning.
Arc Force
Yes

Arc Force


Helps in the stability of the arc during welding.
2T Operation
No
4T Mode
No
Spot Function
No
Pulsed
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

Those users who have this product can help you

Ask for the product

Description & Specifications

MIG/STICK 251 KD Welding Inverter (MIG / MMA / TIG)

Features

  • Nominal voltage: 230 V | 50 Hz
  • Type: Wire & Electrode
  • Welding current range (MIG): 30 - 250 A
  • Welding current range (MMA): 20 - 200 A
  • Welding current range (TIG): 15 - 250 A
  • Power: 10.3 kVA
  • Max. absorbed current: 45 A
  • No-load voltage (Uo): 65 V
  • Wire feed speed: 2 - 18 m/min
  • Cooling type: Air
  • Method: MIG | MMA | TIG
  • Duty cycle (MIG): 60%: 250A | 100%: 192A
  • Duty cycle (MMA): 60%: 200A | 100%: 154A
  • Duty cycle (TIG): 60%: 250A | 100%: 192A
  • Protection level: IP21S
  • Cable: 3 m
  • Dimensions (LxWxH): 62.1x30.0x68.1 cm
  • Weight: 49.5 kg

Description

Heavy-duty multi-task semi-automatic welding inverter, suitable for methods: MIG, MMA, and Lift TIG. Advanced IGBT technology. Timer, 2T / 4T function, gas control, high and low gas pressure control, gas non-return valves, optional capability for aluminum welding. Hot arc start (HOT START), ANTI-STICK technology, arc force adjustment (ARC FORCE). Ampere adjustment potentiometer (A), thermal protection (THERMAL PROTECTION), 35-70 machine quick connectors, digital display. Digital control. LED indicators for power, overload, and under/over-voltage. Compliant with: EN IEC 60974-1. Enclosure protection IP21S. Ergonomic handle and transport wheels. Suitable for use with a generator.

Included

  • MIG 25A air-cooled clamp 4m (BINZEL MB24)
  • Ground clamp 4mx25mm² with clamp and 35-70 quick connection
  • Gas hose 4m with connection
  • 3 nozzles (0.8, 1.0, 1.2)
  • 2 rollers with 2 sides (0.8mm - 1mm)

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
MIG, TIG, MMA

Type

MIG

The easiest welding method even for a beginner. 2. If the wire to be used does not have a special coating (flux), it should be connected to an external gas cylinder (e.g. argon, CO2).

TIG

Slow welding for detailed work on aluminum and stainless steel, mainly. Requires experience and connection to an external gas cylinder. Does not create "spatters".

MMA

Creates thick and strong bonds without the need for external gas supply, making it ideal for out-of-lab welding.
Welding Current (max)
250 A

Welding Current (max): 250


Suitable for professional use on thick metals, such as steel or cast iron constructions.
Operation Cycle (max Ampere)
60 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Supply Voltage
230 V

Supply Voltage: 230


It is the supply voltage that the machine requires from the electrical grid.
Power
10.3 kVA

Power: 10.3


Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.
Weight
49500 gr

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
Yes

IGBT


Allows the conversion of direct current (DC) voltage to alternating current (AC) or the output of direct current at a higher or lower intensity.
VRD
No
with Voltage Stabilizer
No
for Generator with AVR
No

Features

Hot Start
Yes

Hot Start


Temporarily increases the current intensity at the moment of welding initiation.
Anti Stick
Yes

Anti Stick


Cuts off the current if the electrode sticks to the metal, to prevent it from burning.
Arc Force
Yes

Arc Force


Helps in the stability of the arc during welding.
2T Operation
No
4T Mode
No
Spot Function
No
Pulsed
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

1.207,00 €
18,80 €  

Reduced Shipping

For purchases from Skroutz a discount is applied for this particular product.

Learn more
Delivery to your floor available