Surface Preparation

• To ensure proper adhesion of the product, the surface to be painted must be cleaned of dust, grease, oils, flaking old paints, rust, mold residues, or moisture.
• For new or porous surfaces, first apply the corresponding recommended primer of the product (Life dur, Life dur water).
• Apply the product in 2 coats (after shaking it well), which should be spaced 1 - 2 hours apart.

Dilution

• First coat: 15% water.
• Second coat: 5-10% water.

Application Conditions

• Avoid applying the product at temperatures below 6°C and above 40°C and when the relative humidity is above 80%. Adverse conditions during application can alter the final properties of the paint.

Application Tools

• Brush
• Roller
• Paint sprayer

During work, keep the tools “wet” in the container or the product container. Wring out the tools well back into the box and clean them immediately with warm water and soap. If the product dries, it can only be removed with strong detergents. Do not dispose of washing liquids in the groundwater.

Attention: Wear protective gloves, protective clothing, personal protective equipment for the eyes and face. In case of contact with eyes, rinse carefully with plenty of water for several minutes. If contact lenses are present, remove them if easy. Continue rinsing.