Instructions for Use:

• Remove rust and dirt.
• The surface must be clean, dry, and free of grease.
• If necessary, apply a primer.
• Cover/insulate areas you do not want to paint.
• Before use, shake the spray well for 2-3 minutes.
• Perform a test spray to check the shade and compatibility with the surface.
• Spray from about 25 centimeters away, applying several thin cross coats.

Warning: Do not apply on synthetic paints!

Warning word: Danger.

Harmful components: acetone, n-butyl acetate, 1-methoxy-2-propanol acetate ester.

Hazard statements: Extremely flammable aerosol. Pressurized container. May burst if heated. Causes serious eye irritation. May cause drowsiness or dizziness.

Precautionary statements: If medical advice is needed, have the product container or label at hand. Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. Do not smoke. Do not spray near an open flame or other ignition source. Do not pierce or burn, even after use. Do not breathe spray. Protect from sunlight. Do not expose to temperatures exceeding 50°C. Dispose of contents/container according to local regulations.

Additional statements: EUH066 Prolonged exposure may cause skin dryness or cracking. Explosive mixtures may form in poorly ventilated areas.

Additional notes: Xylene: Contains ethylbenzene, CAS Number 100-41-4, CAS 9004-70-0: GB CLP Note T.