Acrylic white insulating material for covering and isolating surfaces that develop yellowing in the final color. It isolates smoke, nicotine, and old moisture, mold, rust, etc. After applying MONO SMOKE, you can paint with any plastic paint or oil-based paint without the problem of stains appearing in the final color.

Surface preparation:

• The surface must be cleaned of dust, grease, oils, peeled-off old paints, rust, mold, or moisture residues.
• Apply the product with a brush or roller and let it dry for 20 - 40 minutes.
• Apply the final color.
• The product gains all its mechanical resistances after 20 - 30 days.

Application conditions:

• Avoid applying the product at temperatures below 6°C and above 40°C and when the relative humidity is greater than 80%.
• Adverse conditions during application can alter the final properties of the product.

Application tools:

• Brush
• Roller

Keep the tools "wet" inside the container during work. Drain the product well from the tools and clean them immediately with white spirit. If the product dries, it can only be removed with strong detergents. Do not discharge the wash liquids into the water supply system.

Technical characteristics:

• Shades: Available in white
• Yield: 10-15m² / Lt on suitably prepared surfaces
• Thinning: Solvent in a ratio of 1-5%
• Drying: 20 - 40 minutes depending on conditions
• Packaging: 750ml, 2.5lt (on order)
• Country of origin: Greece
• Manufacturer: Chromodomi

Safety warnings:

• Keep away from children.
• Avoid contact with skin and eyes.
• In case of contact with eyes, rinse immediately with water and seek medical advice if necessary.
• In case of ingestion, seek medical advice immediately.
• The workspace should be well ventilated.
• Gloves and protective mask are recommended during application.

Waste management:

Special management is required for the leftover paint to ensure it does not burden the environment. Therefore, they should not be disposed of with household waste. For more information on disposal and waste collection, please contact the competent department of Local Government.