The spray film for glass stickers is used to ensure privacy, as from any side you look at, you will only see shadows. The film is applied to the glass, allowing natural light to pass through while blocking solar radiation.

Technical specifications of the spray film:

• Self-adhesive
• Transparent
• Material - PVC
• Silicone paper backing
• Roll width - 137 cm

The film can be applied to surfaces made of glass, mirror, or plexiglass: windows, glass doors, shower enclosures. Installation can be carried out in spaces with a minimum temperature of 15 degrees Celsius.

Steps for applying the film with water: (required materials: window cleaning solution, water, liquid dish soap/shampoo, spray bottle, scraper, cutter, cloth)

• Clean and degrease the glass.
• Prepare the application solution by mixing 1 liter of water with 1 teaspoon of liquid detergent or shampoo.
• Cut the piece of film needed for the window, leaving a margin of 2-3 cm.
• Remove the protective sheet from the back of the film, then spray the solution on the back of the film as you remove the sheet. This way, the film will not attract dust.
• Spray the solution on the window as well, then carefully apply the film and make the necessary adjustments. Start drying from the center outwards to remove water and air bubbles. Using a well-sharpened cutter, trim the excess material next to the cheder.

After application, white spots may appear under the film. These represent a reaction of the glue with the water and will disappear after drying. The glue will dry completely in about 1 week.