SURFACE PREPARATION

• To ensure proper adhesion of the product, the surface to be painted must be cleaned from dust, grease, oils, peeled old paints, rust, mold, or moisture remnants.
• For new or porous surfaces, first apply the corresponding recommended primer of the product (Life dur, Life dur water).
• Apply the product in 2 coats (after having mixed it well beforehand), which should be spaced 1 - 2 hours apart.

DILUTION

• First coat: 15% water.
• Second coat: 5-10% water.

APPLICATION CONDITIONS

• Avoid applying the product at temperatures below 6°C and above 40°C and when the relative humidity is greater than 80%. Adverse conditions during application can alter the final properties of the paint.

APPLICATION TOOLS

• Brush
• Roller
• Spray gun

During the work, keep the tools “wet” in the container or the vessel with the product. Drain the tools well back into the box and clean them immediately with warm water and soap. If the product dries, it can only be removed with strong detergents. Do not dispose of washing liquids into the groundwater.

WARNING: Wear protective gloves, protective clothing, and personal protective equipment for the eyes and face. In case of contact with eyes, rinse carefully with plenty of water for several minutes. If contact lenses are present, remove them if easy. Continue rinsing.