Skroutz.gr

Entac Waterproof Extension Cable Cord 3 x 2.5mm²/40m Black
Extension Cords

Entac Waterproof Extension Cable Cord 3 x 2.5mm²/40m Black Code: 15.005.0430

Entac Extension IP44 3g2.5mm2 40m

  • Power: 3,680 W
  • Length: 40 m
  • Voltage: 250 V
  • Cable Length: 40 m
  • Plug Type: Type F (Schuko)
  • Socket: 1 pcs
  • IP Rating: IP44
  • Rated Current: 16 A
  • Cable Type: 3G2.5

Entac Extension IP44 3g2.5mm2 40m

  • Power: 3,680 W
  • Length: 40 m
  • Voltage: 250 V
  • Cable Length: 40 m
  • Plug Type: Type F (Schuko)
  • Socket: 1 pcs
  • IP Rating: IP44
  • Rated Current: 16 A
  • Cable Type: 3G2.5
See full description See full description

Top specs

  • Length 40 m

  • Cable Cross-Section

    It is the "thickness" of the cable. The thicker it is, the more current it can handle without its temperature rising.

    3 x 2.5

    Intended for heavier loads, such as general-purpose sockets, power tools, ovens, or refrigerators. It can safely support single-phase power supply lines.

  • Maximum Load

    The maximum electrical load that the extension reel can support without overheating. This applies only when the extension reel is fully unwound. When it is wound, the allowable power is lower due to overheating.

  • Protection Certification

    IP protection indicates the resistance of an electrical component to dust and water. The first digit (0–6) refers to protection against solid objects, from none to complete protection against dust. The second digit (0–9) refers to protection against liquids, from drips to full immersion or high-pressure water. For example, IP44 means protection against limited dust and water splashes, while IP67 means complete dust protection and immersion up to 1 meter.

    IP44

    • Protection against solids: 2 → Objects > 12mm (e.g. finger).
    • Protection against water: 0 → No protection.
    • Use: Indoor areas, dry installations, such as lighting fixtures or computers.
     

  • Output Voltage

    Single-phase

    The single-phase extension reel connects to a household or professional 230V AC supply. It is intended for low or medium power devices, such as lamps, computers, or tools. The operating current usually ranges between 10–16A. It is easy to use and transport, but cannot power high-power machines. It is recommended to use cables of suitable cross-section to avoid overheating.
  • See all
120 11 €
121 Coins 121 Coins
Delivery Tuesday
Free   shipping cost
From Electronhouse 5.0 (4)
5.0 (4 reviews)
Πάτρα, Αχαΐας
In-store pickup available
15 pieces
See Electrical Equipment & Automation on the page of Electronhouse
What if it breaks?

You're covered by the statutory 2-year warranty. Contact us and we'll handle the entire process with the store, ensuring your issue is resolved with prompt support through a repair, replacement, or refund.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Review the product
Product report

Description

Description

Entac Extension IP44 3g2.5mm2 40m

  • Power: 3,680 W
  • Length: 40 m
  • Voltage: 250 V
  • Cable Length: 40 m
  • Plug Type: Type F (Schuko)
  • Socket: 1 pcs
  • IP Rating: IP44
  • Rated Current: 16 A
  • Cable Type: 3G2.5

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
15.005.0430

Specifications

Type
Cable
Type
Open Type

Type

Open Type

The reel is open, you can see the cable wound.
Colour
Black
Automatic Cable Rewind
No

Automatic Cable Rewind

The cable automatically retracts back into the reel with a "click", just like with a vacuum cleaner.
Industrial Type
No

Industrial Type

Durable socket for heavy-duty use (e.g. construction sites, workshops)

Technical Features

Length
40 m
Cable Cross Section
3 x 2.5 mm²

Cable Cross Section

It is the "thickness" of the cable. The thicker it is, the more current it can handle without its temperature rising.

3 x 2.5

Intended for heavier loads, such as general-purpose sockets, power tools, ovens, or refrigerators. It can safely support single-phase power supply lines.
Number of Sockets
1
Output Voltage
Single-phase

Output Voltage

Single-phase

The single-phase extension reel connects to a household or professional 230V AC supply. It is intended for low or medium power devices, such as lamps, computers, or tools. The operating current usually ranges between 10–16A. It is easy to use and transport, but cannot power high-power machines. It is recommended to use cables of suitable cross-section to avoid overheating.
Nominal Maximum Load
3680 W

Nominal Maximum Load

The maximum electrical load that the extension reel can support without overheating. This applies only when the extension reel is fully unwound. When it is wound, the allowable power is lower due to overheating.

Safety & Protection

Protection Certification
IP44

Protection Certification

IP protection indicates the resistance of an electrical component to dust and water. The first digit (0–6) refers to protection against solid objects, from none to complete protection against dust. The second digit (0–9) refers to protection against liquids, from drips to full immersion or high-pressure water. For example, IP44 means protection against limited dust and water splashes, while IP67 means complete dust protection and immersion up to 1 meter.

IP44
  • Protection against solids: 2 → Objects > 12mm (e.g. finger).
  • Protection against water: 0 → No protection.
  • Use: Indoor areas, dry installations, such as lighting fixtures or computers.
 
Waterproof
Yes
Overload Protection
No

Overload Protection

The overload protection / thermal switch automatically cuts off the power flow in case of excessive load or overheating, protecting both the device and the cable.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

Those users who have this product can help you

Ask for the product

Description & Specifications

Entac Extension IP44 3g2.5mm2 40m

  • Power: 3,680 W
  • Length: 40 m
  • Voltage: 250 V
  • Cable Length: 40 m
  • Plug Type: Type F (Schuko)
  • Socket: 1 pcs
  • IP Rating: IP44
  • Rated Current: 16 A
  • Cable Type: 3G2.5

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
15.005.0430

Specifications

Type
Cable
Type
Open Type

Type

Open Type

The reel is open, you can see the cable wound.
Colour
Black
Automatic Cable Rewind
No

Automatic Cable Rewind

The cable automatically retracts back into the reel with a "click", just like with a vacuum cleaner.
Industrial Type
No

Industrial Type

Durable socket for heavy-duty use (e.g. construction sites, workshops)

Technical Features

Length
40 m
Cable Cross Section
3 x 2.5 mm²

Cable Cross Section

It is the "thickness" of the cable. The thicker it is, the more current it can handle without its temperature rising.

3 x 2.5

Intended for heavier loads, such as general-purpose sockets, power tools, ovens, or refrigerators. It can safely support single-phase power supply lines.
Number of Sockets
1
Output Voltage
Single-phase

Output Voltage

Single-phase

The single-phase extension reel connects to a household or professional 230V AC supply. It is intended for low or medium power devices, such as lamps, computers, or tools. The operating current usually ranges between 10–16A. It is easy to use and transport, but cannot power high-power machines. It is recommended to use cables of suitable cross-section to avoid overheating.
Nominal Maximum Load
3680 W

Nominal Maximum Load

The maximum electrical load that the extension reel can support without overheating. This applies only when the extension reel is fully unwound. When it is wound, the allowable power is lower due to overheating.

Safety & Protection

Protection Certification
IP44

Protection Certification

IP protection indicates the resistance of an electrical component to dust and water. The first digit (0–6) refers to protection against solid objects, from none to complete protection against dust. The second digit (0–9) refers to protection against liquids, from drips to full immersion or high-pressure water. For example, IP44 means protection against limited dust and water splashes, while IP67 means complete dust protection and immersion up to 1 meter.

IP44
  • Protection against solids: 2 → Objects > 12mm (e.g. finger).
  • Protection against water: 0 → No protection.
  • Use: Indoor areas, dry installations, such as lighting fixtures or computers.
 
Waterproof
Yes
Overload Protection
No

Overload Protection

The overload protection / thermal switch automatically cuts off the power flow in case of excessive load or overheating, protecting both the device and the cable.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

120,11 €
Free   shipping cost