Spacers with bolts, 30mm thick, on the side with centering flange.
Product Description:
- Material - thread type: Duralumin PA6
- Pin with threads: M12 x 1.5
- Spacer thickness: 30 mm per side (60 mm per axle)
- Hole/flange diameter - hole distance: 60.1 mm
- Includes nuts 5x114.3 mm for connecting spacers to hubs (M12 x 1)
- Bolts hardness: 10.9
The spacers fit the following models:
- Lexus GS 300
- Lexus GS 430
- Lexus IS 200
- Lexus IS 220
- Lexus IS 250
- Lexus IS 300
- Lexus RX 300
- Lexus RX 400H
- Lexus SZ 430
The bolt-on spacers are made from duralumin with pressed pins or steel rings with threads, which prevent thread stripping. Both the pins and rings are protected from pulling during wheel tightening thanks to their two-stage shape.
The advantage of spacers is the increase in wheel track, which aids the car's behavior in turns and improves aesthetics, as the wheels are not hidden in the fenders. By using spacers, it is possible to mount rims with different parameters, such as greater offset (ET), eliminating the discrepancy through the spacers.
You can also use spacers that change the bolt distance, allowing the installation of rims from another car with the same number of fastening bolts.