Skroutz.gr

Toya Pump Well 1.46hp 79775
Submersible Water Pumps

Toya Pump Well 1.46hp 79775

Submersible dirty water pump, Flo 79775, with a flow rate of 16000 L/h and a lift height of 8.5 m, power 1100 W.

Technical specifications:

  • Equipped with a float switch for automatic...

Submersible dirty water pump, Flo 79775, with a flow rate of 16000 L/h and a lift height of 8.5 m, power 1100 W.

Technical specifications:

  • Equipped with a float switch for automatic activation/deactivation at different water levels.
  • Made from durable plastic.
  • Must have clean intakes and suction channels.
  • During operation, the pump must be submerged at least...
See full description See full description

Top specs

  • Horsepower

    Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).

  • Power

    It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

  • Manometric Height

    8.5

    The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

    • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
    • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
  • See all
71 04 €
72 Coins 72 Coins
Delivery by Wed, 21 Oct
2,50 € to a Skroutz Point
Do you want it with Free shipping?
Sent from Romania
From Victor Optimus
Romania
3 pieces
See Water Pumps on the page of Victor Optimus
What if it breaks?

You're covered by the statutory 2-year warranty. Contact us and we'll handle the entire process with the store, ensuring your issue is resolved with prompt support through a repair, replacement, or refund.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Review the product
Product report

Description

Description

Submersible dirty water pump, Flo 79775, with a flow rate of 16000 L/h and a lift height of 8.5 m, power 1100 W.

Technical specifications:

  • Equipped with a float switch for automatic activation/deactivation at different water levels.
  • Made from durable plastic.
  • Must have clean intakes and suction channels.
  • During operation, the pump must be submerged at least 7 cm below the water surface.
  • If the water level falls below this value, it automatically stops thanks to the float switch.
  • Can only be hung by the handle designed for this purpose.
  • Can be placed on the bottom of the tank on a flat surface.
  • The well's cross-section must not be less than (40 x 40 x 50) cm.
  • For maximum performance, the pump must be connected with a hose that has a diameter corresponding to the maximum diameter of the water connections.
  • Weight 4.8 Kg.
  • Lift height 8.5 m.
  • Maximum immersion depth 7 m.
  • Protection class X8 IP.
  • Maximum capacity 16000 L/h.
  • Connection diameter 1" (25mm), 5/4" (32mm), 1.5" (38mm).
  • Float switch.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
Well

Type

Well
They are designed to pump water from underground sources when the water is at a depth, and are mainly used for water supply, irrigation, and other applications in areas that do not have easy access to surface water.
Horsepower
1.46 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
1095 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
Yes

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
1"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
8.5 m

Maximum Head Height: 8.5


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Pump Submersion Depth
7 m
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
No
Protection Certification
IPX8

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

Those users who have this product can help you

Ask for the product

Description & Specifications

Submersible dirty water pump, Flo 79775, with a flow rate of 16000 L/h and a lift height of 8.5 m, power 1100 W.

Technical specifications:

  • Equipped with a float switch for automatic activation/deactivation at different water levels.
  • Made from durable plastic.
  • Must have clean intakes and suction channels.
  • During operation, the pump must be submerged at least 7 cm below the water surface.
  • If the water level falls below this value, it automatically stops thanks to the float switch.
  • Can only be hung by the handle designed for this purpose.
  • Can be placed on the bottom of the tank on a flat surface.
  • The well's cross-section must not be less than (40 x 40 x 50) cm.
  • For maximum performance, the pump must be connected with a hose that has a diameter corresponding to the maximum diameter of the water connections.
  • Weight 4.8 Kg.
  • Lift height 8.5 m.
  • Maximum immersion depth 7 m.
  • Protection class X8 IP.
  • Maximum capacity 16000 L/h.
  • Connection diameter 1" (25mm), 5/4" (32mm), 1.5" (38mm).
  • Float switch.

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Well

Type

Well
They are designed to pump water from underground sources when the water is at a depth, and are mainly used for water supply, irrigation, and other applications in areas that do not have easy access to surface water.
Horsepower
1.46 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
1095 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
Yes

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
1"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
8.5 m

Maximum Head Height: 8.5


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Pump Submersion Depth
7 m
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
No
Protection Certification
IPX8

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

71,04 €
2,50 € to a Skroutz Point