High-quality car inverter, reliable, that helps to convert DC 24V power into power supply for 230V electronic devices. It assists in charging devices such as: laptops, tablets, phones, household electronic devices, etc.

GENERAL FEATURES

• Dimensions (L x W x H): 325 x 165 x 92 mm
• Input Voltage Range: 19.8V - 30.27V
• Continuous Output Capability: 800W
• 15-Minute Output Capability: 1000W
• Maximum Capability: 2000W
• Output Voltage: 230V ±5% AC
• THD: < 3%
• Efficiency: 94.8% (70% LOAD)
• No Load Current: < 0.3A
• Output Connectors: 2x Schuko, 1x USB
• 2x Air Coolers
• Pure sine wave output

INSTALLATION

• Ensure that the sum of the power of the electronic device you wish to use does not exceed the rated continuous power of the inverter.
• Before connecting, make sure the inverter is turned off:
• Connect the black cable to the - terminal of the battery.
• Connect the red cable to the + terminal of the battery.
• The inverter is equipped with a standard household AC outlet. Connect the power cable of the device to the outlet and turn on the inverter, then the consumers.

INTEGRATED PROTECTIONS

• Low battery voltage: This condition is not dangerous for the inverter but may damage the power source.
• Overload protection: The inverter will automatically turn off when the input voltage exceeds the normal limit.
• Short circuit protection: The inverter will shut down. Remove the short circuit and the inverter will restart.
• Overload protection: The inverter will automatically turn off when the power consumption exceeds the maximum rated output.
• Overheating protection: When the temperature sensor inside the inverter reaches 75°C, the device will automatically turn off. In this case, wait at least 15 minutes before attempting to restart the inverter and always disconnect the devices.
• If protection is activated, the inverter will notify you with a sound alert and flashing LED.