High-quality and reliable car inverter, which helps convert DC 12V power into 230V power for electronic devices. Ideal for charging devices such as: laptops, tablets, phones, and home appliances.

FEATURES

• Dimensions (L x W x H): 415 x 165 x 82 mm
• Input Voltage Range: 9.55V - 15.5V
• Continuous Output Capacity: 2000W
• 15-Minute Output Capacity: 2500W
• Maximum Capacity: 5000W
• Output Voltage: 230V ±5% AC
• THD Distortion: < 3%
• Efficiency: 94.8% (70% LOAD)
• No Load Current: < 0.5A
• Output Connector: 2x Schuko, 1x USB
• 2x Air Coolers
• Pure Sine Wave

INSTALLATION

• Ensure that the total power of the electronic device you intend to use does not exceed the rated continuous power of the inverter.
• Before connecting, make sure the inverter is turned off:
  • Connect the black wire to the negative terminal of the battery.
  • Connect the red wire to the positive terminal of the battery.
• The inverter is equipped with a standard AC outlet. Plug the device's power cord into the outlet and turn on the inverter, then the consumers.

BUILT-IN PROTECTIONS

• Low battery voltage: This situation is not dangerous for the inverter, but it may damage the power source.
• Overload protection: The inverter will automatically turn off when the input voltage exceeds the normal limit.
• Short-circuit protection: The inverter will shut down. Remove the short circuit and the inverter will reset.
• Overcharge protection: The inverter will automatically turn off when the power consumption exceeds the maximum output capacity.
• Overheating protection: When the temperature sensor inside the inverter reaches 75°C, the device will automatically turn off. In this case, wait at least 15 minutes before attempting to turn the inverter back on and always disconnect devices.
• If the protections are activated, the inverter will notify you with a sound alarm and a blinking LED.