The mini LED amplifier allows for the extension of the LED strip while maintaining the brightness of the light and the adjusted operation, without the need for additional power supply for each additional LED strip attached to the chain.

The multiple use of amplifiers and power adapters allows for unlimited extension of the LED strip chain.

This device is actually an LED controller that transmits the current voltage from the previous strip to the next consumers.

• Power Supply: DC12V
• Current: 4A * 3 CH
• Power Loss: <0.5W
• Operating Temperature: -20 ~ +60 ° C
• Voltage Output: 12V-144W, 24V-288W
• Weight: 30g / pc

The power supply voltage of this amplifier must meet the specifications. Otherwise, supplying a higher voltage will damage it.

The four wires coming from the amplifier must be connected correctly. Incorrect connection may cause a short circuit. When connecting the amplifier wires to the LED installation, follow the attached diagram.

Do not remove the label from the amplifier. It contains important information about the device.

Connection:

• Connect the link of one strip to the input of the amplifier, following the position of the marked arrows, which must point to each other.
• Connect the link of the next strip to the output of the amplifier, again following the position of the marked arrows that point to each other.
• Connect the red and black wires to the 12V power supply, connecting the red wire to "+", and the black wire to "-".