Car Inverter

High-quality, reliable inverter that helps convert DC 12V into power supply for electronic devices 230V. Ideal for charging devices such as: laptops, tablets, phones, home electronic devices, etc.

GENERAL CHARACTERISTICS

• Dimensions (L x W x H): 270 x 151 x 85 mm
• Input Voltage Range: 9.55V - 15.5V
• Continuous Output Capacity: 800W
• Output Capacity for 15 minutes: 1000W
• Maximum Capacity: 2000W
• Output Voltage: 230V ±5% AC
• Required THD: < 3%
• Efficiency: 94.8% (70% Load)
• No Load Current: < 0.5A
• Output Port: 2x Schuko, 1x USB
• 2x Air Coolers
• Correct sine wave waveform

INSTALLATION

• Ensure that the total wattage of the electronics you want to use does not exceed the continuous capacity listed on the inverter.
• Before connecting, ensure that the inverter is turned off:
• Connect the black cable to the negative pole of the battery.
• Connect the red cable to the positive pole of the battery.
• The inverter is equipped with a standard AC outlet. Connect the device's power cable to the outlet and turn on the inverter and then the consumers.

BUILT-IN PROTECTIONS

• Weak battery voltage: This condition is not dangerous for the inverter but can damage the power source.
• Overload protection: The inverter will automatically shut down when the input voltage exceeds the normal limit.
• Short circuit protection: The inverter will shut down. Remove the short circuit and the inverter will recover.
• Overload protection: The inverter will automatically shut down when the power consumption exceeds the rated maximum output capacity.
• Overheat protection: When the temperature sensor inside the inverter reaches 75°C, the device will automatically shut down. In this case, wait at least 15 minutes before attempting to restart the inverter and always disconnect the devices.
• If protection is activated, the inverter will warn you with an audible alert and a flashing LED.