The offered power supply is intended for the construction of electric fences that delimit grazing areas, mainly for cattle. It can also be used to protect crops from wild animals, e.g., deer, wild boars, martens, and others.

The presented device produces electric pulses approximately every 1 second (~50-55 pulses per minute). The frequency of the pulses and their voltage are indicated by the control light located on the front of the actuator casing. This system allows for continuous monitoring of the proper functioning of this device and quick detection of any failures.

The power supply, made from high-quality plastic, is connected with cables to the grounding line and the fence. They must be combined so as not to pose a danger to users or animals. It should be noted that despite emitting very quick pulses with very high voltage (up to 8000V) and energy (up to 2.2J), the power supply will not harm the animal. Its task is to teach respect for the fence and prevent exceeding the designated area.

The assembly of the offered product is easy and does not require much time or energy. The device has special mounts that allow it to be placed on the wall. Additionally, the set is equipped with a hanging metal bracket.

The power supply should be placed outside the animal building, under a roof, to protect it from moisture. Additionally, for safety, it is recommended to turn off the power supply when not needed and during storms.

With proper construction and use of insulation, the maximum length of the fence that this energizer can protect reaches up to 70 km. A very economical device, it consumes only 7W (the product operates in pulses and therefore uses very little energy). It is powered from the 230V network.

Key parameters of the device:

• Power supply: 230V/50Hz
• Built-in overvoltage protection system over 250V
• Input power: 7W
• Idle voltage: 8000V
• Maximum pulse energy: 2.2J
• Maximum discharge energy (average value): 2.0 J (provided on the casing)
• Maximum fence length: 80 km

The device was manufactured in France by the well-known and respected company Chapron. The device meets the requirements of the European Union (CE).