Universal polyurethane adhesive, two-component, suitable for difficult applications.

Features:

• Adheres to many surfaces and can be used where other glues fail, e.g.: metal, iron, stainless steel, aluminum, zinc, concrete, stone, marble, ceramics, tiles, glass, rubber, and various plastics.
• Suitable for difficult applications.
• Water-resistant (marine quality).
• Temperature resistance from -30°C to +100°C.
• Strength up to 180kg/cm³.

Instructions for use:

The adhesive consists of two parts: resin and hardener. Squeeze out two equal "lines" of adhesive from each tube. In this way, the correct mixing ratio between resin and hardener (4 parts resin to 1 part hardener) is achieved. Mix the two parts well until you obtain a homogeneous paste-like mixture. Depending on the temperature and the amount of adhesive you mixed, it will remain usable for 15 minutes. Apply the adhesive to only one of the surfaces (or on the item to be bonded) and join the parts, holding them together with a clamp or in a support.