Skroutz.gr

Kraft & Dele Single-phase Pump Well 0.86hp KD1703
Submersible Water Pumps

Kraft & Dele Single-phase Pump Well 0.86hp KD1703

Submersible pump for clear water, 100 mm, 0.65 kW, 45 l/min, Kraft&Dele KD1703

Technical specifications:

  • Model: KD1703
  • Voltage: 230V
  • Frequency: 50Hz
  • Power: 0.65KW
  • Maximum temperature: 35°C
  • Maximum...

Submersible pump for clear water, 100 mm, 0.65 kW, 45 l/min, Kraft&Dele KD1703

Technical specifications:

  • Model: KD1703
  • Voltage: 230V
  • Frequency: 50Hz
  • Power: 0.65KW
  • Maximum temperature: 35°C
  • Maximum speed: 3000 rpm
  • Maximum lift: 50 m
  • Maximum flow rate: 45 l/min
  • Cable length: 15m
  • Pump size: 4" - 100mm
  • Weight: approximately 11.5 kg

Description and Features:

...

See full description See full description

Top specs

  • Horsepower

    Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).

  • Voltage

    Single-Phase

    Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 

  • Power

    It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

  • Manometric Height

    50

    The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

    • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
    • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
  • See all
92 59 €
93 Coins 93 Coins
Delivery by Tue, 15 Sep
10,00 €  

Reduced Shipping

For purchases from Skroutz a discount is applied for this particular product.

Learn more
Do you want it with 5,00 € shipping?
Sent from Poland
From RicoShop
Poland
14 pieces
See Water Pumps on the page of RicoShop
What if it breaks?

You're covered by the statutory 2-year warranty. Contact us and we'll handle the entire process with the store, ensuring your issue is resolved with prompt support through a repair, replacement, or refund.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Product report

Description

Description

Submersible pump for clear water, 100 mm, 0.65 kW, 45 l/min, Kraft&Dele KD1703

Technical specifications:

  • Model: KD1703
  • Voltage: 230V
  • Frequency: 50Hz
  • Power: 0.65KW
  • Maximum temperature: 35°C
  • Maximum speed: 3000 rpm
  • Maximum lift: 50 m
  • Maximum flow rate: 45 l/min
  • Cable length: 15m
  • Pump size: 4" - 100mm
  • Weight: approximately 11.5 kg

Description and Features:

The Kraft & Dele KD1703 submersible pump is an ideal device for pumping clear water, as well as for use in pressure boosting systems. The device is suitable for pumping water to supply single-family homes and holiday properties. The pump has high efficiency while being economical, made from a sturdy metal alloy, and the pump's motor is equipped with modern thermal protection.

Note: The pump is not intended for continuous operation. The operating cycle of the pump should be intermittent and should be: half an hour of operation, 20 minutes of rest - depending on the temperature of the pumped liquid, which should not exceed 35°C.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
Well

Type

Well
They are designed to pump water from underground sources when the water is at a depth, and are mainly used for water supply, irrigation, and other applications in areas that do not have easy access to surface water.
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
0.86 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
645 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
15 m
Motor Rotation Speed
3000 rpm

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
50 m

Maximum Head Height: 50


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (1)

Reviews

1
0.0
There are no verified reviews
Review this product
  1. 1
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product

Reviews by our members

  • petrosdaglas
    5
    petrosdaglas
    This review is about power: 495 W, outlet nozzle: 1"

    Submersible screw technology pump

    It is the well-known "Archimedes' pump" but in a submersible version.
    Simple and effective construction

    Positives

    - Despite its low power, it can pump water from significant depths
    - Relatively lightweight, weighing about 9.5 kg.
    - It appears to be repairable if necessary
    - The flow rate matches that of the manufacturer

    Negatives
    - The user manual is only in Polish

    I was forced to translate the manual into Greek, which was time-consuming and difficult.
    I will only write a summary of the very basic steps before operating the pump

    !!! Under no circumstances should the pump be operated out of water

    1) After unpacking, visually check the power cord along its entire length for any injuries
    2) With a multimeter set to the resistance position of 2MΩ, measure the resistance at the ends of the plug. If the reading exceeds 2MΩ, then there is a problem
    3) If all the above is okay, initially submerge the pump in water with a height of about 1 meter and test it to check the flow

    The submersion depth of the pump should not be less than 0.5 m.
    Care should be taken to ensure that the unit is below the water level during operation.
    Do not lift the pump out of the water during operation.
    The pump should be secured and fixed during its operation in the water.
    The operating voltage of the pump should not exceed ± 10% as it will burn out

    The pump code is "4QGD1-8-50-0-5" and the manufacturer is logically Yuanle Pump Co., Ltd.
    I later found a digital manual in Romanian at the address: https://www.ogorul.ro/static/download/6117/4qgd-mu.pdf
    The translation from the Polish manual is better, but the Romanian manual translates faster. The combination of both translations helps with the final meaning. The casing of the pump is made of INOX 304.
    I was satisfied because it does what I want in the way I want

    In the photo, you can see the flow from a 1" diameter pipe, 30 meters long, and a lift from the water level of 13m.

    Translated from Greek ·
    Did you find this review helpful?
  • petrosdaglas
    5
    petrosdaglas

    Submersible screw technology pump

    It is the well-known "Archimedes' pump" but in a submersible version.
    Simple and effective construction

    Positives

    - Despite its low power, it can pump water from significant depths
    - Relatively lightweight, weighing about 9.5 kg.
    - It appears to be repairable if necessary
    - The flow rate matches that of the manufacturer

    Negatives
    - The user manual is only in Polish

    I was forced to translate the manual into Greek, which was time-consuming and difficult.
    I will only write a summary of the very basic steps before operating the pump

    !!! Under no circumstances should the pump be operated out of water

    1) After unpacking, visually check the power cord along its entire length for any injuries
    2) With a multimeter set to the resistance position of 2MΩ, measure the resistance at the ends of the plug. If the reading exceeds 2MΩ, then there is a problem
    3) If all the above is okay, initially submerge the pump in water with a height of about 1 meter and test it to check the flow

    The submersion depth of the pump should not be less than 0.5 m.
    Care should be taken to ensure that the unit is below the water level during operation.
    Do not lift the pump out of the water during operation.
    The pump should be secured and fixed during its operation in the water.
    The operating voltage of the pump should not exceed ± 10% as it will burn out

    The pump code is "4QGD1-8-50-0-5" and the manufacturer is logically Yuanle Pump Co., Ltd.
    I later found a digital manual in Romanian at the address: https://www.ogorul.ro/static/download/6117/4qgd-mu.pdf
    The translation from the Polish manual is better, but the Romanian manual translates faster. The combination of both translations helps with the final meaning. The casing of the pump is made of INOX 304.
    I was satisfied because it does what I want in the way I want

    In the photo, you can see the flow from a 1" diameter pipe, 30 meters long, and a lift from the water level of 13m.

    Translated from Greek ·
    0
  • See all
Questions

Questions

Do you have a question about the product?

Those users who have this product can help you

Ask for the product

Description & Specifications

Submersible pump for clear water, 100 mm, 0.65 kW, 45 l/min, Kraft&Dele KD1703

Technical specifications:

  • Model: KD1703
  • Voltage: 230V
  • Frequency: 50Hz
  • Power: 0.65KW
  • Maximum temperature: 35°C
  • Maximum speed: 3000 rpm
  • Maximum lift: 50 m
  • Maximum flow rate: 45 l/min
  • Cable length: 15m
  • Pump size: 4" - 100mm
  • Weight: approximately 11.5 kg

Description and Features:

The Kraft & Dele KD1703 submersible pump is an ideal device for pumping clear water, as well as for use in pressure boosting systems. The device is suitable for pumping water to supply single-family homes and holiday properties. The pump has high efficiency while being economical, made from a sturdy metal alloy, and the pump's motor is equipped with modern thermal protection.

Note: The pump is not intended for continuous operation. The operating cycle of the pump should be intermittent and should be: half an hour of operation, 20 minutes of rest - depending on the temperature of the pumped liquid, which should not exceed 35°C.

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Well

Type

Well
They are designed to pump water from underground sources when the water is at a depth, and are mainly used for water supply, irrigation, and other applications in areas that do not have easy access to surface water.
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
0.86 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
645 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
15 m
Motor Rotation Speed
3000 rpm

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
50 m

Maximum Head Height: 50


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (1)

1
0.0
There are no verified reviews
Review this product
  1. 1
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product

Reviews by our members

  • petrosdaglas
    5
    petrosdaglas
    This review is about power: 495 W, outlet nozzle: 1"

    Submersible screw technology pump

    It is the well-known "Archimedes' pump" but in a submersible version.
    Simple and effective construction

    Positives

    - Despite its low power, it can pump water from significant depths
    - Relatively lightweight, weighing about 9.5 kg.
    - It appears to be repairable if necessary
    - The flow rate matches that of the manufacturer

    Negatives
    - The user manual is only in Polish

    I was forced to translate the manual into Greek, which was time-consuming and difficult.
    I will only write a summary of the very basic steps before operating the pump

    !!! Under no circumstances should the pump be operated out of water

    1) After unpacking, visually check the power cord along its entire length for any injuries
    2) With a multimeter set to the resistance position of 2MΩ, measure the resistance at the ends of the plug. If the reading exceeds 2MΩ, then there is a problem
    3) If all the above is okay, initially submerge the pump in water with a height of about 1 meter and test it to check the flow

    The submersion depth of the pump should not be less than 0.5 m.
    Care should be taken to ensure that the unit is below the water level during operation.
    Do not lift the pump out of the water during operation.
    The pump should be secured and fixed during its operation in the water.
    The operating voltage of the pump should not exceed ± 10% as it will burn out

    The pump code is "4QGD1-8-50-0-5" and the manufacturer is logically Yuanle Pump Co., Ltd.
    I later found a digital manual in Romanian at the address: https://www.ogorul.ro/static/download/6117/4qgd-mu.pdf
    The translation from the Polish manual is better, but the Romanian manual translates faster. The combination of both translations helps with the final meaning. The casing of the pump is made of INOX 304.
    I was satisfied because it does what I want in the way I want

    In the photo, you can see the flow from a 1" diameter pipe, 30 meters long, and a lift from the water level of 13m.

    Translated from Greek ·
    Did you find this review helpful?
  • petrosdaglas
    5
    petrosdaglas

    Submersible screw technology pump

    It is the well-known "Archimedes' pump" but in a submersible version.
    Simple and effective construction

    Positives

    - Despite its low power, it can pump water from significant depths
    - Relatively lightweight, weighing about 9.5 kg.
    - It appears to be repairable if necessary
    - The flow rate matches that of the manufacturer

    Negatives
    - The user manual is only in Polish

    I was forced to translate the manual into Greek, which was time-consuming and difficult.
    I will only write a summary of the very basic steps before operating the pump

    !!! Under no circumstances should the pump be operated out of water

    1) After unpacking, visually check the power cord along its entire length for any injuries
    2) With a multimeter set to the resistance position of 2MΩ, measure the resistance at the ends of the plug. If the reading exceeds 2MΩ, then there is a problem
    3) If all the above is okay, initially submerge the pump in water with a height of about 1 meter and test it to check the flow

    The submersion depth of the pump should not be less than 0.5 m.
    Care should be taken to ensure that the unit is below the water level during operation.
    Do not lift the pump out of the water during operation.
    The pump should be secured and fixed during its operation in the water.
    The operating voltage of the pump should not exceed ± 10% as it will burn out

    The pump code is "4QGD1-8-50-0-5" and the manufacturer is logically Yuanle Pump Co., Ltd.
    I later found a digital manual in Romanian at the address: https://www.ogorul.ro/static/download/6117/4qgd-mu.pdf
    The translation from the Polish manual is better, but the Romanian manual translates faster. The combination of both translations helps with the final meaning. The casing of the pump is made of INOX 304.
    I was satisfied because it does what I want in the way I want

    In the photo, you can see the flow from a 1" diameter pipe, 30 meters long, and a lift from the water level of 13m.

    Translated from Greek ·
    0
  • See all
92,59 €
10,00 €  

Reduced Shipping

For purchases from Skroutz a discount is applied for this particular product.

Learn more
Κέρδισε 30€ κουπόνι με Mastercard
Κέρδισε 30€ κουπόνι με Mastercard
Πρόλαβέ τo