1. Wear protective gloves
2. Before cleaning, ensure the area has been thoroughly rinsed with water.
3. Rinse the area to be cleaned with clean water.
4. Turn the nozzle from the <<STOP>> position to the <<SPRAY>> position.
5. Spray the area to be cleaned thoroughly. After use, turn the nozzle back to the <<STOP>> position and store the bottle in a safe place.
6. Using a sponge, scrub the treated area for 2-3 minutes. A foam may form. Allow the product to work for at least 5 minutes.
7. Rinse with plenty of water; at this stage, the foam may increase. Continue rinsing until the foaming stops.
8. Heavily soiled spots may require a second application.

To ensure that this product is suitable for your pool surface, it is recommended to first test it on a small area before applying it along the entire waterline or elsewhere. The product is used when the pool is empty unless it is for an outside-the-pool stain.

• Removes oils, fats, and metals.
• Fast-acting formula.
• Non-acidic composition.
• Available in 1Ltr & 5Ltr

Dosage: Apply to a clean surface and scrub with a sponge for 2-3 minutes, let it sit for 5 minutes, then rinse.

Frequency: As needed.