Complete wheel reprocessing and painting kit. The set includes quality products from AVEX and is suitable for those who wish to repair and refresh their wheels. The kit contains:

• 2 x 400 ml Champion spray paint
• 1 x 500 ml Champion clear coat spray
• 1 x Special putty for aluminum wheels
• 1 x Set of disposable gloves
• 1 x Set of sandpaper of various grits for surface correction
• 1 x Roll of masking tape for protecting the edge of the tire

Application instructions:

1. Thoroughly clean the wheels of dust and grease.
2. Repair the dents in the wheels to create a rough surface for the putty adhesion.
3. Clean again or blow away any metal debris.
4. Apply masking tape around the wheel, on the tire, to protect from paint fumes.
5. Apply the putty to the dents with a spatula, wood, or your fingers (use the gloves provided).
6. After about 10 minutes, once the putty has hardened, finish the surface with fine sandpaper.
7. Repeat the process if necessary, until all dents are covered.
8. After restoring the surface, prepare it for painting with fine sandpaper.
9. Clean the surface of the wheel from any dust residues.
10. Shake the spray paint for about 2 minutes and apply it to the wheel with smooth motions.
11. Allow to dry for 10-20 minutes before applying the next layer.
12. 2-3 layers are recommended for better coverage.
13. Apply the clear coat in the same way, optionally in multiple layers for high gloss.

Weight: 1.000 EAN: 6427637001097 Product code: AVX-KVJ-RV2 Brand: AVEX