The PGP FAUX WOOD FINISH is the final coating that gives the surface the appearance of wood. It is applied over the PGP FAUX WOOD PRIMER substrate and has excellent adhesion and coverage, providing a glossy finish. It is used on hard surfaces and is available in 6 different shades that match the shades of PGP FAUX WOOD PRIMER.

Advantages:

• Easy application
• Excellent adhesion
• Can be applied to any surface
• Available in 6 shades

Applications:

• Ideal solution for renewing old or worn surfaces, giving them the look of wood.
• Can be applied to metal surfaces, MDF, chipboard, melamine, wooden and plastic surfaces, drywall, concrete, plaster, etc.

Surface Preparation:

• Surfaces must be dry and clean.
• New wooden surfaces: sand with sandpaper and remove dust.
• Painted surfaces: old substrates in good condition do not need to be removed.
• Metallic and glossy surfaces: remove gloss with sandpaper.
• Apply 1 or 2 coats of PGP FAUX WOOD PRIMER and allow to dry for 24 hours.

Application:

• Mix the material well before and during use.
• Apply the first coat of PGP FAUX WOOD FINISH and allow to dry for 12 hours.
• Apply the second coat using the special PGP WOOD REPLICA tool to create wood patterns and allow to dry for 12 hours.
• For better protection, you can apply a third coat of clear varnish.

Coverage: 12 - 16 m2/Lt

Dilution: up to 5% with white spirit

Application: with a brush and the special PGP WOOD REPLICA tool

Initial drying: 2 - 3 hours at 20°C

Final drying: 12 hours at 20°C

Application temperature: 10°C - 35°C

Cleaning: with white spirit