Skroutz.gr

Ddt Bdp1100-3f Submersible Clean Dirty Water Pump 3-in-1 1100w
Submersible Water Pumps

Ddt Bdp1100-3f Submersible Clean Dirty Water Pump 3-in-1 1100w

The 3-in-1 Submersible Pump for Clean/Dirty Water DDT BDP1100-3F, 1100W is designed to offer optimal performance as well as high reliability in its operation. Ideal for pumping water from basements,...

The 3-in-1 Submersible Pump for Clean/Dirty Water DDT BDP1100-3F, 1100W is designed to offer optimal performance as well as high reliability in its operation. Ideal for pumping water from basements, pools, ponds, and flooded areas, as well as other domestic applications that require transferring water from one point to another or emptying tanks and water...

See full description See full description

Top specs

  • Horsepower

    Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).

  • Voltage

    Single-Phase

    Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 

  • Power

    It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

  • Manometric Height

    6

    The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

    • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
    • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
  • See all
61 14 €
62 Coins 62 Coins
Delivery by Mon, 12 Oct
2,50 € to a Skroutz Point
Do you want it with Free shipping?
Sent from Romania
From Dawer 4.2 (4)
4.2 (4 reviews)
Romania
20+ pieces
See Water Pumps on the page of Dawer
What if it breaks?

You're covered by the statutory 2-year warranty. Contact us and we'll handle the entire process with the store, ensuring your issue is resolved with prompt support through a repair, replacement, or refund.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Review the product
Product report

Description

Description

The 3-in-1 Submersible Pump for Clean/Dirty Water DDT BDP1100-3F, 1100W is designed to offer optimal performance as well as high reliability in its operation. Ideal for pumping water from basements, pools, ponds, and flooded areas, as well as other domestic applications that require transferring water from one point to another or emptying tanks and water reservoirs.

The pump features an automatic air dehumidification system that removes air from the pump (pre-filling). If the water level drops below the air valve, some water flows are released to expel the air from the pump. The float switch is automatically activated at a water height of approximately 53 cm and deactivates when the water level falls below 50 cm. The height can be adjusted by locking a float cable. To prevent the float switch from stopping, you can switch to mechanical mode by locking the float in a vertical position.

Advantages of the 3-in-1 Submersible Pump DDT BDP1100-3F, 1100W:

  • Multifunctional use as a submersible pump for clean or dirty water.
  • Low suction level: 1 mm for clean water.
  • Suitable for emptying tanks, pumping drinking and circulating water or dirty water from containers, water reservoirs, or flooded basements.
  • Suitable for garden irrigation from water reservoirs.
  • Simple and comfortable adjustment of the pump base for the desired operation.
  • Double sealing system for pump protection when the water is particularly dense or contains large particles.
  • Overload protection: protects the motor from overheating.
  • Adjustable float switch for automatic operation.
  • Easy conversion from automatic operation with float switch to mechanical operation for low suction.
  • Durable plastic casing that withstands impacts.
  • Ergonomic handle for comfortable transport.

Warning:

  • Lubricant residues or other impurities entering the pump body affect its proper operation.
  • Not suitable for pumping chemicals or flammable or corrosive liquids.
  • Not recommended for cesspools and toilet sewage systems.

Technical Specifications:

  • Product type: Domestic water pump without grinder.
  • Input voltage: 230 V.
  • Maximum temperature (°C): 35.
  • Power KW/W: 1100 W.
  • Power HP: 2.8 HP.
  • Float switch: Yes.
  • Pieces per set: 1.
  • Pieces per box: 4.
  • Power cable length (m): 8.
  • Maximum height: 6 m.
  • Weight: 4.2 kg / 4.6 kg.
  • Protection rating: IP X8.
  • Frequency: 50 Hz.
  • Dimensions: 199 x 198 x 356 mm.
  • Outlet diameter: 1 1/4 inches.
  • Maximum flow: MAX 17 m³/hour.
  • Brand: DDT.
  • Maximum depth: 7 m.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
Well

Type

Well
They are designed to pump water from underground sources when the water is at a depth, and are mainly used for water supply, irrigation, and other applications in areas that do not have easy access to surface water.
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
2.8 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
2100 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
6 m

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
Yes

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
1/4"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
6 m

Maximum Head Height: 6


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Pump Submersion Depth
6 m
Maximum Particle Size
1 mm

Maximum Particle Size

Specifies the largest size of solid particles (such as sand, stones, or other impurities) that the device can pump without clogging or being damaged.
Shallow Suction
Yes

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
Yes
Stainless
No
Protection Certification
IPX8

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

Those users who have this product can help you

Ask for the product

Description & Specifications

The 3-in-1 Submersible Pump for Clean/Dirty Water DDT BDP1100-3F, 1100W is designed to offer optimal performance as well as high reliability in its operation. Ideal for pumping water from basements, pools, ponds, and flooded areas, as well as other domestic applications that require transferring water from one point to another or emptying tanks and water reservoirs.

The pump features an automatic air dehumidification system that removes air from the pump (pre-filling). If the water level drops below the air valve, some water flows are released to expel the air from the pump. The float switch is automatically activated at a water height of approximately 53 cm and deactivates when the water level falls below 50 cm. The height can be adjusted by locking a float cable. To prevent the float switch from stopping, you can switch to mechanical mode by locking the float in a vertical position.

Advantages of the 3-in-1 Submersible Pump DDT BDP1100-3F, 1100W:

  • Multifunctional use as a submersible pump for clean or dirty water.
  • Low suction level: 1 mm for clean water.
  • Suitable for emptying tanks, pumping drinking and circulating water or dirty water from containers, water reservoirs, or flooded basements.
  • Suitable for garden irrigation from water reservoirs.
  • Simple and comfortable adjustment of the pump base for the desired operation.
  • Double sealing system for pump protection when the water is particularly dense or contains large particles.
  • Overload protection: protects the motor from overheating.
  • Adjustable float switch for automatic operation.
  • Easy conversion from automatic operation with float switch to mechanical operation for low suction.
  • Durable plastic casing that withstands impacts.
  • Ergonomic handle for comfortable transport.

Warning:

  • Lubricant residues or other impurities entering the pump body affect its proper operation.
  • Not suitable for pumping chemicals or flammable or corrosive liquids.
  • Not recommended for cesspools and toilet sewage systems.

Technical Specifications:

  • Product type: Domestic water pump without grinder.
  • Input voltage: 230 V.
  • Maximum temperature (°C): 35.
  • Power KW/W: 1100 W.
  • Power HP: 2.8 HP.
  • Float switch: Yes.
  • Pieces per set: 1.
  • Pieces per box: 4.
  • Power cable length (m): 8.
  • Maximum height: 6 m.
  • Weight: 4.2 kg / 4.6 kg.
  • Protection rating: IP X8.
  • Frequency: 50 Hz.
  • Dimensions: 199 x 198 x 356 mm.
  • Outlet diameter: 1 1/4 inches.
  • Maximum flow: MAX 17 m³/hour.
  • Brand: DDT.
  • Maximum depth: 7 m.

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Well

Type

Well
They are designed to pump water from underground sources when the water is at a depth, and are mainly used for water supply, irrigation, and other applications in areas that do not have easy access to surface water.
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
2.8 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
2100 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
6 m

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
Yes

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
1/4"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
6 m

Maximum Head Height: 6


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Pump Submersion Depth
6 m
Maximum Particle Size
1 mm

Maximum Particle Size

Specifies the largest size of solid particles (such as sand, stones, or other impurities) that the device can pump without clogging or being damaged.
Shallow Suction
Yes

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
Yes
Stainless
No
Protection Certification
IPX8

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

61,14 €
2,50 € to a Skroutz Point