The product requires careful surface preparation for proper adhesion. The surface should be free from dust, grease, oils, rust, and any residues of mold or moisture. On old varnished floors, it is recommended to sand the surface with appropriate sandpaper. Before application, prime the surface with the corresponding recommended primer.

Application procedure:

• Shake the product well.
• Apply one coat.
• After 6 hours, apply a second coat.
• The product achieves all its mechanical strengths after 20 - 30 days.

Application conditions:

• Avoid application at temperatures below 6°C and above 40°C.
• The relative humidity should not be greater than 80%.
• Adverse conditions during application may alter the final properties of the product.

Application tools:

• Brush
• Roller
• Paint sprayer

During the work, keep the tools "wet" inside the container with the product. After use, immediately clean the tools with White spirit. If the product dries, it can only be removed with strong detergents. Do not dispose of washing liquids into the groundwater.

Technical specifications:

• Coverage: 10-15m2 / Lt per coat.
• Dilution: 1 - 5% White spirit.
• Drying: 2 - 4 hours depending on application conditions.

Caution: Wear protective gloves, protective clothing, and personal protective equipment for eyes and face. In case of contact with eyes, rinse carefully with plenty of water for several minutes. If contact lenses are present, remove them if easy. Continue rinsing.

In case of emergency, call the Poison Control Center at 210 7793777.

Technical brochure