Diesel Intake System Cleaner

This diesel intake system cleaner is specially designed to remove impurities and deposits from the diesel intake area and the throttle body. The product contains a powerful combination of solvents that dissolve and remove contaminants such as lubricants, resins, and soot, ensuring the proper operation of the moving parts of the diesel engine.

• Highly effective cleaner for diesel engines.
• Removes deposits and impurities from the diesel intake area and the throttle body.
• Dissolves lubricants, resins, soot, and other contaminants.
• Ensures the proper operation of moving parts and increases engine safety.
• Ideal for preventive use during inspection.

Application:

• Access the intake system as close to the engine as possible and after the mass air flow sensor.
• Start the engine to begin the cleaning process.
• If the engine cannot maintain RPM or does not start after removing the intake hose, disconnect the plug from the mass air flow sensor with the ignition off.
• Spray the cleaner in short intervals (2-3 seconds) at a minimum of 2,000 RPM, moving back and forth to clean the entire intake area.
• If RPM increases above 1,000, stop spraying immediately.
• Avoid contact of the cleaner with the mass air flow sensor and painted components.
• In case of persistent deposits (e.g., in the EGR valve, intake manifold, or intake valves), repeat cleaning with a second can.
• Let the engine run for about 20 seconds at a minimum of 2,000 RPM to burn off any remaining amounts in the intake system.

Caution:

• Do not remove the spray head from the can again after installation.
• Do not allow the cleaner to come into contact with the mass air flow sensor or painted components.

Product Code: 2388/5168