Car Cleaning & Care Products

This product requires caution during application and good ventilation. The application temperature should range from +10°C and above, ideally between 20 and 30°C. It is important to check the compatibility of the material and paint in case of panel repainting. The vehicle must be thoroughly washed and surfaces cleaned, and if necessary, polished to remove imperfections and achieve an excellent finish without scratches, marks, or holograms.

Before applying the ceramic coating, use Prepare (237300) with a Soft Touch microfiber towel (451000) and gently wipe all surfaces. Add a few drops of CC One to the white side of the applicator and apply a thin, even layer with crosswise movements. The application surface should be about half a square meter (1/4 of the hood). After 1-3 minutes, wipe off the residue with a microfiber cloth for ceramic coatings (451341-1) without leaving streaks. Follow the same procedure for the entire vehicle and allow the coating to cure for at least 4 hours.

Additionally, if the applicator begins to harden, replace it immediately. The vehicle should remain in a clean and dry area and surfaces should not be touched for the required period. The contents of the package are sufficient for a complete application. Avoid applying on hot surfaces and the drying process. Washing the car is prohibited for the first 7 days after application. Caution: Avoid cleaners with high alkaline pH, as they may damage the protective coating.

Warnings: Flammable liquid and vapors. Causes serious eye irritation. Harmful to aquatic organisms with long-lasting effects. Keep out of reach of children. Use outdoors or in a well-ventilated area. Wear protective gloves and eye protection. In case of contact with eyes, rinse carefully. If irritation persists, seek medical advice. Dispose of contents/container according to local or national regulations.