Skroutz.gr

Berdsen Freestanding Vent Hood 50cm Inox
Vent Hoods

Berdsen Freestanding Vent Hood 50cm Inox Code: BE-10-A INOX

The Berdsen free-standing cooker hood is ideal for installation either under cabinets or as a standalone unit. With a width of 50cm, it offers a maximum extraction power of 205 m³/h, capable of...

The Berdsen free-standing cooker hood is ideal for installation either under cabinets or as a standalone unit. With a width of 50cm, it offers a maximum extraction power of 205 m³/h, capable of comfortably covering areas up to 7 square meters. This hood can operate either with air extraction through a duct or by recirculating air within the kitchen,...

See full description See full description

  • Item

    Standard

    "It is of classic type and cannot be built-in."

  • Noise Level

    Shows how much noise the extractor makes when it is in operation.

    2. The fewer the db, the quieter it is. An extractor with 58db or less is considered quite quiet.

  • Energy class

    The energy class categorizes devices into groups according to the current they consume, ranging from the lowest D to the highest A+++.

    2. The higher the energy class, the lower the electricity consumption.

    3. For example, for a 12 sq.m. kitchen with an extractor fan that has an absorption power of about 340m³/h and frequent weekly use, the difference in annual cost from D to A is about €6, and from A to A+++ the difference is almost negligible.

  • Extraction Power (Max)

    Displays the maximum absorption capacity. To calculate the required absorbency, knowledge of the dimensions of the kitchen space is necessary.


    For example, for a 7 sqm kitchen, the required absorption power is approximately 200m³/h, for 12 sqm it is approximately 340m³/h, and for 15 sqm it is 420m³/h and above.

  • Filter Type

    Metal

    They are used in most extractors. Metallic filters are easy to remove and clean, either in the dishwasher or by hand. They do not require frequent replacement.
  • See all
127 07 €
128 Coins 128 Coins
Delivery Thu, 06 Aug - Mon, 10 Aug
10,00 €  

Reduced Shipping

For purchases from Skroutz a discount is applied for this particular product.

Learn more
Do you want it with 5,00 € shipping?
Sent from Poland
From SpeedParcel 5.0 (5)
5.0 (5 reviews)
Poland
5+ pieces
See Large Appliances on the page of SpeedParcel
What if it breaks?

You're covered by the statutory 2-year warranty. Contact us and we'll handle the entire process with the store, ensuring your issue is resolved with prompt support through a repair, replacement, or refund.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Is delivery to a floor free?

Yes, we will carry it up to the floor for you, without any restrictions.

  • Extended warranty

    • Valid for 3 more years
    • With the reliability of Allianz Partners
    Learn more
You can select additional services after adding the product to the cart.
Review the product
Product report

Description

Description

The Berdsen free-standing cooker hood is ideal for installation either under cabinets or as a standalone unit. With a width of 50cm, it offers a maximum extraction power of 205 m³/h, capable of comfortably covering areas up to 7 square meters. This hood can operate either with air extraction through a duct or by recirculating air within the kitchen, depending on your needs. It is equipped with metal filters, which are easy to remove and clean, as they are dishwasher-safe or can be washed by hand and do not require frequent replacement.

  • Width: 50cm
  • Extraction Power (Max): 205m³/h
  • Energy Class: B

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
BE-10-A INOX

Product Details

Type
Standard

Type

Standard

"It is of classic type and cannot be built-in."
Retro
No
Grease Filter Material
Metal

Grease Filter Material

Metal

They are used in most extractors. Metallic filters are easy to remove and clean, either in the dishwasher or by hand. They do not require frequent replacement.
Extraction Mode
Extraction or Recirculation

Extraction Mode

Concerns the way in which the extractor absorbs air.

Extraction or Recirculation

The extractor fan has both functions. The air that the extractor fan draws can either be extracted through a pipe or recycled back into the fan. For air extraction function, a pipe is needed to remove the air outside the kitchen.
Dual Motor
No
Type of Control
Switches
Timer Function
No
Filter Cleaning Indicator
No
Washable Filter
Yes
Colour
Inox

Technical Features

Extraction Power (Max)
205 m³/h

Extraction Power (Max)

Displays the maximum absorption capacity. To calculate the required absorbency, knowledge of the dimensions of the kitchen space is necessary.


For example, for a 7 sqm kitchen, the required absorption power is approximately 200m³/h, for 12 sqm it is approximately 340m³/h, and for 15 sqm it is 420m³/h and above.
Extraction Power (Boost)
205 m³/h

Extraction Power (Boost)

The boost power enhances absorption even more for a short period of time. After a while, it returns to maximum absorption.


The function is ideal for odors during frying and grilling.

Dimensions

Width
50 cm

Energy Label

Energy Class
B

Energy Class

The energy class categorizes devices into groups according to the current they consume, ranging from the lowest D to the highest A+++.

2. The higher the energy class, the lower the electricity consumption.

3. For example, for a 12 sq.m. kitchen with an extractor fan that has an absorption power of about 340m³/h and frequent weekly use, the difference in annual cost from D to A is about €6, and from A to A+++ the difference is almost negligible.
Average Energy Consumption per Year
26 kWh/y
Extraction Flow Efficiency
E

Extraction Flow Efficiency

Expresses how effective the extractor is in absorbing odors. 2. The performance scale starts at G for less efficient extractors and goes up to A for more efficient ones. 3. Typically, a rating of D and above is a good performance for effectively absorbing odors from cooking.
Lighting Efficiency
A

Lighting Efficiency

Expresses the intensity of the hood's lighting. The scale starts from G for the lowest performance where the lighting is quite soft, up to A for the highest performance where the lighting is more intense. It is usually recommended to have a lighting performance index of C or higher to facilitate cooking with more intense lighting.
Fat Retention Efficiency
E

Fat Retention Efficiency

Shows how effectively the filters of the extractor work in retaining fat. 


The scale starts from G for the lowest performance, up to A for the highest performance. 


A performance rating of C and above is considered satisfactory for fat retention during cooking.
Noise Level
61 dB

Noise Level

Shows how much noise the extractor makes when it is in operation.

2. The fewer the db, the quieter it is. An extractor with 58db or less is considered quite quiet.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

Those users who have this product can help you

Ask for the product

Description & Specifications

The Berdsen free-standing cooker hood is ideal for installation either under cabinets or as a standalone unit. With a width of 50cm, it offers a maximum extraction power of 205 m³/h, capable of comfortably covering areas up to 7 square meters. This hood can operate either with air extraction through a duct or by recirculating air within the kitchen, depending on your needs. It is equipped with metal filters, which are easy to remove and clean, as they are dishwasher-safe or can be washed by hand and do not require frequent replacement.

  • Width: 50cm
  • Extraction Power (Max): 205m³/h
  • Energy Class: B

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
BE-10-A INOX

Product Details

Type
Standard

Type

Standard

"It is of classic type and cannot be built-in."
Retro
No
Grease Filter Material
Metal

Grease Filter Material

Metal

They are used in most extractors. Metallic filters are easy to remove and clean, either in the dishwasher or by hand. They do not require frequent replacement.
Extraction Mode
Extraction or Recirculation

Extraction Mode

Concerns the way in which the extractor absorbs air.

Extraction or Recirculation

The extractor fan has both functions. The air that the extractor fan draws can either be extracted through a pipe or recycled back into the fan. For air extraction function, a pipe is needed to remove the air outside the kitchen.
Dual Motor
No
Type of Control
Switches
Timer Function
No
Filter Cleaning Indicator
No
Washable Filter
Yes
Colour
Inox

Technical Features

Extraction Power (Max)
205 m³/h

Extraction Power (Max)

Displays the maximum absorption capacity. To calculate the required absorbency, knowledge of the dimensions of the kitchen space is necessary.


For example, for a 7 sqm kitchen, the required absorption power is approximately 200m³/h, for 12 sqm it is approximately 340m³/h, and for 15 sqm it is 420m³/h and above.
Extraction Power (Boost)
205 m³/h

Extraction Power (Boost)

The boost power enhances absorption even more for a short period of time. After a while, it returns to maximum absorption.


The function is ideal for odors during frying and grilling.

Dimensions

Width
50 cm

Energy Label

Energy Class
B

Energy Class

The energy class categorizes devices into groups according to the current they consume, ranging from the lowest D to the highest A+++.

2. The higher the energy class, the lower the electricity consumption.

3. For example, for a 12 sq.m. kitchen with an extractor fan that has an absorption power of about 340m³/h and frequent weekly use, the difference in annual cost from D to A is about €6, and from A to A+++ the difference is almost negligible.
Average Energy Consumption per Year
26 kWh/y
Extraction Flow Efficiency
E

Extraction Flow Efficiency

Expresses how effective the extractor is in absorbing odors. 2. The performance scale starts at G for less efficient extractors and goes up to A for more efficient ones. 3. Typically, a rating of D and above is a good performance for effectively absorbing odors from cooking.
Lighting Efficiency
A

Lighting Efficiency

Expresses the intensity of the hood's lighting. The scale starts from G for the lowest performance where the lighting is quite soft, up to A for the highest performance where the lighting is more intense. It is usually recommended to have a lighting performance index of C or higher to facilitate cooking with more intense lighting.
Fat Retention Efficiency
E

Fat Retention Efficiency

Shows how effectively the filters of the extractor work in retaining fat. 


The scale starts from G for the lowest performance, up to A for the highest performance. 


A performance rating of C and above is considered satisfactory for fat retention during cooking.
Noise Level
61 dB

Noise Level

Shows how much noise the extractor makes when it is in operation.

2. The fewer the db, the quieter it is. An extractor with 58db or less is considered quite quiet.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

127,07 €
10,00 €  

Reduced Shipping

For purchases from Skroutz a discount is applied for this particular product.

Learn more