Spray Paint is suitable for high-quality and easy application on various surfaces. Follow the instructions below:

• Surface Preparation: Remove rust and dirt. The surface should be clean, dry, and free of grease. If necessary, apply a primer.
• Area Protection: Cover or insulate areas that will not be painted.
• Shaking: Before use, shake the spray well for 2-3 minutes. Do a test spray to check the shade and compatibility with the surface.
• Application: Spray from about 25 centimeters distance, applying several thin overlapping passes.

Note: Do not apply over synthetic paints!

Warning: Danger. Hazardous components: acetone, n-buty acetate, 1-methoxy-2-propanol acetate ester.

Hazard Statements: Extremely flammable aerosol. Pressurized container. May burst if heated. Causes serious eye irritation. May cause drowsiness or dizziness.

Precautionary Statements: If medical advice is needed, keep the container or label available. Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. Do not smoke. Pressurized container: do not pierce or burn, even after use. Avoid inhalation of vapors. Protect from sunlight. Do not expose to temperatures exceeding 50°C. Dispose of contents/container in accordance with local regulations.

Additional Statements: EUH066 Repeated exposure may cause dry skin or cracking. Flammable mixtures can form in poorly ventilated areas.

Additional Notes: Xylene: Contains ethylbenzene, CAS Number 100-41-4, CAS 9004-70-0: GB CLP Note T.