Extremely fast and strong liquid instant glue that penetrates even the smallest joints and corners.

• Properties: Extremely fast and strong, penetrates the smallest corners and joints.
• Application: Ideal for small bonding jobs. Bonds almost all solid and flexible materials such as many plastics (hard PVC, ABS, PS, Plexiglas®, polycarbonate (Makrolon®), and phenolic resins (Bakelite®)), porcelain, ceramics, leather, metal, wood, cork, felt, fabric (check compatibility first), and rubber. Partially suitable for glass (bonding becomes brittle over time).
• Not suitable for: PE, PP, silicone resins, PTFE, polystyrene foam, fabrics and leather clothing.
• Handling: Do not use at temperatures below +10 °C. The glue performs best at air humidity 50–70%.
• Surface requirements: Surfaces must be clean, dry, free of dust or grease, and fit perfectly.
• Preliminary surface preparation: Remove dust, oil, grease, wax, or release agents. The best way is to rub surfaces with appropriate solvents, such as acetone (if suitable for the material – check first).
• During use – Instructions: Pierce the membrane by turning the cap clockwise onto the tube. Unscrew the cap to expose the applicator. Apply the glue as thinly as possible to one side and immediately press the parts together.
• After use: Clean the nozzle with dry paper and replace the cap.
• Points of attention: Contains cyanoacrylate. Bonds skin and eyelids in seconds. In case of eye contact: rinse immediately with plenty of water and seek medical advice.
• After use – Residue: Wipe off any excess immediately with a dry cloth. Once cured, the glue is difficult to remove.
• Storage conditions: Store in a dry, cool place, frost-free.

Technical characteristics:

• Chemical base: Ethyl cyanoacrylate
• Color: Crystal clear
• Form: Liquid
• Density: approx. 1.05 g/cm³
• Final bond strength (Aluminum): 12 N/mm²
• Final strength after: 24 hours
• Initial bonding: 5–60 seconds (depending on materials, temperature, humidity)
• Minimum temperature resistance: -40 °C
• Maximum temperature resistance: 80 °C
• Moisture resistance: Good
• Solvent-free: Yes
• Viscosity: Low
• Water resistance: Very good