Recommended instructions for use:

• Sand the surface with sandpaper and ensure it is clean, dry, and free of grease.
• Protect the surrounding area from overspray.
• Shake the container for 2 minutes.
• Test spray and check the color.
• Spray from a distance of 20-25 cm and apply several thin coats.
• Processing temperature: 10-25°C.
• Drying time: 2 hours.
• After use, turn the can upside down and spray for a few seconds.

Warning word: Danger.

Dangerous substances that must be listed on the labels: Acetone, n-butyl acetate, 2-methoxy-1-methylethyl acetate, butan-1-ol.

Hazard statements: Extremely flammable aerosol. Pressurized container. May burst if heated. Causes serious eye irritation. May cause drowsiness or dizziness. Harmful to aquatic life with long-lasting effects.

Precautionary statements: If medical advice is needed, keep the container or label nearby. Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames, and other sources of ignition. Do not smoke. Do not spray near flames or other sources of ignition. Do not pierce or burn, even after use. Avoid breathing spray or mist. Protect from sunlight. Do not expose to temperatures above 50°C. Dispose of contents/container according to local regulations.

Additional information: Prolonged exposure may cause skin dryness or cracking. Without proper ventilation, explosive mixtures can form. Caution! Dangerous inhalable droplets can form during spraying. Do not breathe spray or mist.